S8700 Media Server Leds - Avaya S8700 Installing Manual

• "Attendant Console LEDs"
• "Terminal Alarm Notification"
"Circuit Pack LEDs"
•
• "DS1 Converter Circuit Pack LEDs"
"SPAN LEDs"
•
• "IP Server Interface LEDs"

S8700 Media Server LEDs

The media server has the LEDs shown in
LEDs on front and back of media server
scdlled KLC 030502
Figure notes
Power
1
2 Configuration fault
3 Hard drive activity
Network activity (CNA)
4
5 Service—configuration health
Active or standby mode indicator
6
Testing the Media Server LEDs
You can test some of the LEDs on the front of the media server through the media server Web
interface. This makes sure that the Active/Standby and U2 LEDs (on the front of the media
"LEDs on front and back of media
1 2
SERVICE ACTIVE
1
U2
STANDBY
3 4 4 5 6 7
2
1
U2 (not defined)
7
8 4 NIC ports (the numbers indicate
their assigned Ethernet ports)
LEDs for the NIC ports (some NICs
9
may not have LEDs)
LEDs for fiber optic duplication
10
connectivity
Status LED (not used)
11
October 2002
Testing the Complete Configuration
server":
8
5 5 4 4 3 3
2 2
9
10
215
11