Cim Control - Huawei RMS-SNMP01A User Manual

RMS-SNMP01A SNMP Card
User Manual
8.
Step 7 Verify whether the operation is correct. Choose Monitoring > Real-Time Data > Battery
String Settings, and you can view the data of batteries. Choose Monitoring > Active alarms,
and there is no alarm (such as CIM number inconsistency, BIM communication failure). Then
the operation is correct. If the operation is incorrect, check whether each step is performed
correctly.
----End

10.3 CIM Control

On the WebUI, choose Monitoring > Control > CIM Control to control and maintain the
CIMs and BIMs. For details, see
Issue 08 (2020-01-09)
Ensure that the number of BIMs for a battery string is the same as the number of
batteries in the battery string set on the Config > Comm. Config page, and is not greater
than the number of batteries in the battery string set on this page.
Copyright © Huawei Technologies Co., Ltd.
10 Monitoring Batteries by Using iBAT 2.0
4.4.4 Control Page.
73