Huawei RMS-SNMP01A User Manual page 50

RMS-SNMP01A SNMP Card
User Manual
Table 4-5 Association between DO status and UPS status
Name
DO1
DO1
Table 4-6 Association between DI status and UPS status
Name
DI1
DI1
DI1
DI1
CIM Settings
If CIMs are used, set the number of CIMs based on the number of actually connected CIMs,
as shown in
Figure 4-23 CIM settings
Issue 08 (2020-01-09)
Associated UPS Status
Event
Bypass mode Bypass mode
Bypass mode Mains mode
Type Associated
Event
NO Startup
NC Startup
NO Startup
NC Startup
Figure 4-23.
Copyright © Huawei Technologies Co., Ltd.
DO Status
NO and COM pins of DO are closed, NC and
COM pins of DO are open.
NC and COM pins of DO are closed, NO and
COM pins of DO are open.
DI Status
There is a 12–24 V DC input.
There is a 12–24 V DC input.
There is no input.
There is no input.
4 Managing the UPS on the WebUI
Execute Event
or Not
Yes
No
No
Yes
42