Huawei RMS-SNMP01A User Manual page 27

RMS-SNMP01A SNMP Card
User Manual
(7) Reset button
The external dry contact card connects to the UPS over an SNMP card.
how to connect cables to the external dry contact card.
The RMS-SNMP01A card does not support connection to a temperature and humidity sensor
and an external dry contact card at the same time.
Figure 3-14 Connecting cables to the external dry contact card
Figure 3-15 DIP switch
Issue 08 (2020-01-09)
Refer to the external dry contact card user manual and set the card address to 8.
DIP switch status of the RMS-RELAY02B. 1 is set to ON and other toggle switches are set to OFF. The
baud rate is set to 9600.
Copyright © Huawei Technologies Co., Ltd.
(8) Dual in-line package
(DIP) switch
3 Installation and Basic Settings
(9) Fastener
Figure 3-14 shows
Figure 3-15 shows the
19