Huawei RMS-SNMP01A User Manual page 36

RMS-SNMP01A SNMP Card
User Manual
Figure 4-8 Login page
Step 2 Set the language, user name, password, and verify code. The default user name is admin, and
the preset password is Changeme.
Table 4-1 Description of UPS users
User Name
admin
guest
Step 3 Click Login. The Monitoring page is displayed, as shown in
----End
Issue 08 (2020-01-09)
Password
Changeme
N/A
 There is no verification code on the login page by default. After three login failures, a verification
code is required.
 If you enter incorrect passwords for five consecutive times, your account is locked for 1 hour.
 The UPS2000-G provides battery management functions but the UPS2000-A does not.
Copyright © Huawei Technologies Co., Ltd.
Table 4-1 describes UPS users.
User Rights
Performs all operations on the WebUI, including:

System running information browsing
 Parameter configuration
 System control (startup, shutdown, battery
management, and CIM control)
 System configuration(communication configuration,
user management, site configuration, performance
data, SNMP, and RCCMD)
 System maintenance (upgrade, operation record
maintenance, performance data maintenance,
historical alarms maintenance, serviceable data
maintenance, and CIM E-Label)
Only browses system running information, without
permission to perform any system changes.
4 Managing the UPS on the WebUI
Figure 4-9.
28