Webui Login - Huawei RMS-SNMP01A User Manual

RMS-SNMP01A SNMP Card
User Manual


When using the preceding functions, you are obligated to take considerable measures, in
compliance with the laws of the countries concerned and the user privacy policies of your
company, to ensure that the personal data of users is fully protected. For example, you need to
anonymize user personal information and delete source files in time.

4.3 WebUI Login

Procedure
Step 1 If the SNMP card IP address is not changed, enter https://192.168.0.10. Open the web
browser (Internet Explorer 8 as an example). In the address box, enter the SNMP card IP
address to open the login page, as shown in
Issue 08 (2020-01-09)
Email
The UPS2000 can send alarm notification emails. When an alarm is generated or cleared,
the system sends an alarm email to the user. This function may involve system and
personal information, including the email address and email password.
On the WebUI, only part of the email address is displayed. For example,
support@huawei.com is displayed as su****t@huawei.com. The email password is
displayed as ciphertext *****.
The system provides the personal data encryption protection. The email address and
password are encrypted using a secure encryption algorithm with a cipher key.
The email sending function is disabled by default. Users need to configure the email
server address and enable this function.
Mobile number
The UPS2000 can send alarm notification short messages through GSM modem. When
an alarm is generated or cleared, the system sends a short message to users. Users can
send short messages to query the system status and active alarms. This function may
involve system and personal information, including the device information and mobile
number.
The system displays part of a mobile number. For example, the system displays
01415478578 as 014****8578 on the WebUI.
The system provides the personal data encryption protection. Mobile numbers are
encrypted using a secure encryption algorithm with a cipher key.
The GSM modem is an optional function and is disabled by default. Users need to decide
whether to buy it.
Copyright © Huawei Technologies Co., Ltd.
4 Managing the UPS on the WebUI
Figure 4-8
27