Snmp - Huawei RMS-SNMP01A User Manual

RMS-SNMP01A SNMP Card
User Manual
Figure 4-31 Performance Data page

4.6.5 SNMP

On the SNMP tab, you can configure the SNMP version, SNMP port, SNMPv1&SNMPv2c
read and write communities, SNMPv3 user, NMS address and permission setting, and SNMP
TRAP, as shown in
Figure 4-32 SNMP
The SNMP page configures the SNMP version, SNMP port, SNMPv1&SNMPv2c read and
write communities, and SNMPv3 user, as shown in
If you manage the UPS by using the NMS, pay attention to this topic.
SNMP version has three options: SNMPv1&SNMPv2c, SNMPv3, and ALL. Different
versions support different NMS access mechanisms.


Issue 08 (2020-01-09)
Figure 4-32.
The default value is SNMPv3. The configured user name, authentication protocol
(MD5/SHA), and proprietary protocol (DES/AES) are used by the NMS to access the
SNMP card and add SNMPv3 users, as shown in
For the SNMPv1&SNMPv2c option, enter the read and write communities. If this option
is selected, the NMS needs to connect to the SNMP card through the read and write
communities set here. When setting the read and write communities for the first time,
Copyright © Huawei Technologies Co., Ltd.
4 Managing the UPS on the WebUI
Figure 4-33 and Figure
Figure 4-33.
4-34.
48