Huawei RMS-SNMP01A User Manual page 65

RMS-SNMP01A SNMP Card
User Manual



Issue 08 (2020-01-09)
RCCMD Shutdown: You need to specify the RCCMD client IP address and port. When
the RCCMD client receives the job, it will shut down the terminal which is installed with
the RCCMD software.
Figure 4-45 RCCMD shutdown
RCCMD Message: Specify the RCCMD client IP address, port, and message to be
conveyed. The RCCMD client will receive the message. For example, enter "This is a
test message".
Figure 4-46 RCCMD message
RCCMD Execute: Specify the RCCMD client IP address, port, and command to be
executed. For example, enter SHUTDOWN, and the RCCMD client will shut down the
terminal which is installed with the RCCMD software after receiving the message.
Copyright © Huawei Technologies Co., Ltd.
4 Managing the UPS on the WebUI
57