Capture Bar; During Recording - GRAPHTEC GL980 User Manual

19 . Capture bar

(1) During recording

Displays the elapsed time and the usage status on the internal memory, the SD card and the USB
memory usage.
Elapsed time
Used capacity of internal memory, SD
card and USB memory
Total capacity of internal memory, SD card and USB memory
For example, when you are using a 4GB SD card with 100MB already used, the total capacity of the SD
card is 4GB with 100MB used space, and the available space of the SD card would be approximately
3.9GB. As the captured time elapses, the usage of the SD card increases and the remaining capacity of
the SD card decreases.
The remaining recording time indicates the remaining capacity of the SD card.
However, when the relay capturing function is set to Off, and when the remaining capacity of the SD card
exceeds 4GB, the remaining time that can be captured to 1 file will indicate 4GB.
* Remaining time which is more than 99999 hours is displayed as "++++:++:++".
(2) During data replay
Show the display position, cursor position, and trigger position graphically.
Cursor A position Cursor B position
Range for which a waveform is currently
displayed
Remaining capacity of internal memory, SD
card and USB memory
Capture data size
CHAPTER 3 Settings and Measurement
Remaining time for data capture
3-11