Table of Contents
Advertisement
12
(1) Move the cursor to "Data Capture File Name" and then press the ENTER
key to show the submenu.
(2) Move the cursor to "Folder" and the press the ENTER key to show the file
menu.
(3) Press the
key to move to the "Internal Flash Memory" layer, press the
key to align the cursor with the
show the file name input menu.
(4) Here let's input "TEST" as a test.
Align the cursor with the desired text and then press the ENTER key.
Finally, move the cursor from the text selection area, align it with the
mark, and then press the ENTER key.
(5) Return to screen (2) and align the cursor with the
created folder and then press the ENTER key.
(6) Align the cursor with
When this setting has been made, data will be captured to the <TEST>
folder in the internal flash memory with an automatic file name.
(7) In the lower part of the screen, we can check the amount of data than can
be captured and the allowable data capture time.
This completes all the settings required for data capture.
icon, and then press the ENTER key to
Text input box
Select the text type; delete; insert; confirm
Select the text
and then press the ENTER key.
icon to select the
Advertisement
Table of Contents
