Ad Count Value Display And Keyboard Testing; Rtc Setting; Setting Mode& Description Of Parameter Values - Jadever JWE Series Service Manual

4-5 AD COUNT Value display and keyboard testing

5 Press and hole key
display "POS3"
ZERO
6 Press to enter weighing mode. Press others key to conduct keyboard testing
M+/MR
Press , the screen will display "LO"
MC/SET
Press
MODE
Press , the screen will display "HI"
TARE
Press , the screen will display the battery symbol

4-6 RTC setting

1. Press and hold key
screen displays nothing.
MC/SET
2. Release
MODE
3. Press to switch between date and time.
TARE
4. Press to move the digit place
ZERO
5. Press to change the details
MC/SET
6. Press
4-7 Setting Mode& Description of Parameter Values
Setting Mode
MODE
1) Long-press key
displays "CAL", then release the keys.
MODE
2) Press key
M+/MR
3) Press key
MC/SET
4) Press key
setting and back to the weighing mode. If more settings are needed, press key
JADEVER SCALE CO., LTD
M+/MR MODE
and
, the screen will display "OK"
MC/SET
while powering on the scale. After the self-test is finished, the
, and the screen displays the time
to exit.
while powering on the scale to enter setting mode. The screen
to circle through setting modes.
to choose function.
switch on and off the chosen function. Press key
JWE service manual
while powering on the scale. The screen will
-
ZERO+
to save the
MODE
again.
14