Modules; Module Specifications And Connections; General Specifications - YASKAWA MP2200 User Manual

2 Module Specifications and Connections

2.1.1 General Specifications

2.1 SVB-01 Module Specifications and Connections
2.1.1 General Specifications
( 1 ) Hardware Specifications
The following table shows the hardware specifications of the SVB-01 Module.
Item
Name
Model Number
Description
MECHATROLINK Motion Network
Indicators
Switches
Ambient Operating
Temperature
Ambient Storage
Temperature
Ambient Operating
Environmental
Humidity
Conditions
Ambient Storage
Humidity
Pollution Level
Corrosive Gas
Operating Altitude
Vibration Resistance
Mechanical
Operating
Conditions
Shock Resistance
Electrical
Operating Noise Resistance
Conditions
Ground
Installation
Requirements
Cooling Method
Dimensions (mm)
Mass
2-2
Specifications
Motion Modules
JAPMC-MC2310
SVB-01
Motion network: 1 channel
Communication ports: 2 ports
SERVOPACK and I/O:
Up to 21 stations connectable (SERVOPACK for up to 16 axes)
Baud rate:
4 Mbps (MECHATROLINK-I) or 10 Mbps (MECHATROLINK-II)
RUN (green)
ERR (red)
TX (green)
−
M/S (Master/Slave)
SIZE (Number of transfer bytes)
SPD (Baud rate)
×1 (slave address)
×10 (slave address)
0 to 55°C
−25 to 85°C
30% to 95% (with no condensation)
5% to 95% (with no condensation)
Pollution level 1 (conforming to JIS B 3501)
There must be no combustible or corrosive gas.
2,000 m above sea level or lower
Conforms to JIS B 3502.
Vibration amplitude/acceleration:
10 ≤ f < 57 Hz, Single-amplitude of 0.075 mm
57 ≤ f ≤ 150 Hz, Fixed acceleration of 9.8 m/s
10 sweeps (1 sweep = 1 octave per minute) each in the X, Y, and Z directions
Conforms to JIS B 3502.
2
Peak acceleration of 147 m/s twice for 11 ms each in the X, Y, and Z directions
Conforms to EN 61000-6-2 and EN 55011 (Group 1, Class A).
Power supply noise (FT noise): 2 kV min., for one minute
Radiation noise (FT noise): 1 kV min., for one minute
Ground to 100 Ω max.
Natural cooling
125 × 95 (H×D)
80 g
WWW.NNC.IR
2