Fujitsu Fr Flash Programmer; Full Operation - Fujitsu MB91460 Series Application Note

3 Fujitsu FR Flash Programmer

This chapter explains the usage of the 'Fujitsu FR Flash Programmer' for serial
asynchronous programming of the MB91460 series flash devices.
The 'Fujitsu FR Flash Programmer' is a serial asynchronous programming tool for the Fujitsu
FR flash microcontrollers. It supports a lot of FR series.
The 'Fujitsu FR Flash Programmer' can be used for development purposes free-of-charge
and is not released for any mass-production purposes.
There are two ways of programming:

3.1 Full Operation

Full Operation is the easiest way to use this programmer software. You only have to select
the target microcontroller device (e.g. "MB91F467D") and the mhx-file you want to program
to the embedded flash memory.
MCU-AN-300012-E-V13
Serial Asynchronous Flash Programming
Chapter 3 Fujitsu FR Flash Programmer
Figure 11: Fujitsu FR Flash Programmer Icon
•
Full Operation
•
Manual (step-by-step)
Figure 12: Fujitsu FR Flash Programmer Full Operation 1
- 18 - © Fujitsu Microelectronics Europe GmbH