Sk-91467B-144Pmc - Fujitsu MB91460 Series Application Note

Serial Asynchronous Flash Programming
Chapter 12 SK-91467B-144PMC

12 SK-91467B-144PMC

This chapter describes the needed settings for programming the MB91F465B, MB91F467B
or MB91F464H on the starterkit SK-91467B-144PMC.
The starterkit SK-91F467B-144PMC is a multifunctional development board for the FUJITSU
32bit flash microcontroller MB91F465B/MB91F467B and MB91F464H in QFP144 package.
It can be used stand-alone for software development and testing or together with monitor
debugger software.
Figure 53: Connection to starterkit SK-91F467B-144PMC
For serial asynchronous programming SUB-D9 connector X2/LIN-UART4 which is
connected to UART4 has to be used. Following jumper setting is needed:
MCU-AN-300012-E-V13 - 54 - © Fujitsu Microelectronics Europe GmbH