Fujitsu MB91460 Series Application Note page 25

Figure 18: Programmer action
© Fujitsu Microelectronics Europe GmbH
Serial Asynchronous Flash Programming
Chapter 4 GALEP-Programmer
Use the functions now enabled on the bottom of the
window to select action:
•
Program: write loaded mhx/bin-file to MCU
•
Verify: compare loaded file to Flash contents
•
Blank: do a blank check
•
Read: read-out Flash content
•
Erase: perform a chip erase
After selecting a operation, tab 'Action' is automatically
activated. Press 'Start' button to start operation.
For further information on available settings in software
and jumper settings on starterkits have a look at 'Options"
'MB91F467D Options" (or other MCU type) and 'Device
Help'.
- 23 - MCU-AN-300012-E-V13