Parallel Programming With Galep-4 Programmer - Fujitsu MB91460 Series Application Note

4.1.1 Parallel Programming with GALEP-4 Programmer

The GALEP-4 programmer includes a 40-pin Textool
Packages (DIP). For other packages optional adapters are available, e.g.:
Package
QFP208
LQPF100
LQFP120
BGA256
LQFP64
LQFP144
LQFP176
LQFP144
LQFP176
LQFP176
Connect the adapter to the Textool
the adapter and close the adapter's cover. Start the GALEP32 programmer software and
use 'Load' command to load a bin or hex file. Select tab 'Devices' and browse to the correct
device, e.g. MCU
parallel programming. In the information window below the correct programming adapter is
listed. Use 'Select Device!' button to accept current selection.
© Fujitsu Microelectronics Europe GmbH
Serial Asynchronous Flash Programming
Chapter 4 GALEP-Programmer
GALEP-Adapter
210881
210882
210883
210884
210889
210890
210891
210892
210898
210899
Table 6: Parallel Programming Adapters
TM
–socket (take care pin 1 marking), place the MCU in
Fujitsu MB91F467D. Choose QFP208 (or correct package) for
Figure 16: GALEP-4 with adapter 210881
- 21 -
TM
-socket, for devices with Dual-Inline-
Remark
MB91F465D, MB91F467D
MB91F464A, MB91F465X
MB91F465K
MB91F469G
MB91F463N
MB91F465B, MB91F467B
MB91F467R
MB91F465C, MB91F467C
MB91F465P, MB91F467P
MB91F467S
MCU-AN-300012-E-V13