Softune; Usb Programmer - Fujitsu F2 MC-8FX Series Application Note

LQFP80 PGM ADAPTOR V1.0
Chapter 2 Application Environment

2.3 SOFTUNE

SOFTUNE is used to program and debug, as software development environment. The
version of it is F2MC-8L/8FX SOFTUNE Workbench V30L31, as below picture. It can be
downloaded from the following website.
Web: http: //www.fujitsu.com/cn/fmc/service/mcu/tools.
Figure 2.3: SOFTUNE Version

2.4 USB Programmer

The MB95310 series USB programmer is not support by far and will be updated later.
MCU-AN-500068-E-10– Page 6