Mx480 Interface Modules-Fpcs And Pics; Mx480 Flexible Pic Concentrator (Fpc) Description - Juniper MX480 Hardware Manual

SEE ALSO
Protocols and Applications Supported by DPCs and Enhanced DPCs (DPC and DPCE-R)
Protocols and Applications Supported by Enhanced Ethernet Services DPCs (DPCE-X)
Protocols and Applications Supported by Enhanced Queuing IP Services DPCs (DPCE-R-Q)
Protocols and Applications Supported by Enhanced Queuing Ethernet Services DPCs (DPCE-X-Q)
Protocols and Applications Supported by the Multiservices DPC (MS-DPC)
MX480 Interface Modules—FPCs and PICs
IN THIS SECTION

MX480 Flexible PIC Concentrator (FPC) Description | 119

MX480 Flexible PIC Concentrator (FPC) LEDs | 121
FPCs Supported by MX240, MX480, and MX960 Routers | 122
MX480 PIC Description | 122
MX480 PIC Port and Interface Numbering | 123
MX480 PIC LEDs | 125
PICs Supported by MX240, MX480, and MX960 Routers | 125
MX480 Flexible PIC Concentrator (FPC) Description
A Flexible PIC Concentrator (FPC) occupies two DPC slots on an MX Series router. The router has six
dedicated DPC slots that are numbered 0 through 5, bottom to top. Up to three FPCs can be installed
horizontally on the front of the router (see
numbered DPC slot for which the FPC is installed.
Figure 32 on page 120). The interface corresponds to the lowest
119