Troubleshooting The Mx480 Pics - Juniper MX480 Hardware Manual

Max Power Consumption
Slot 3 information:
State
Temperature
Total CPU DRAM
Total RLDRAM
Total DDR DRAM
Start time:
Uptime:
Max Power Consumption
Slot 4 information:
State
Temperature
Total CPU DRAM
Total RLDRAM
Total DDR DRAM
Start time:
Uptime:
Max Power Consumption
For further description of the output from the commands, see the Junos OS Administration Library.
SEE ALSO
MX480 Modular Port Concentrator (MPC) Description | 151
Maintaining MX480 MPCs | 360
Replacing an MX480 MPC | 363

Troubleshooting the MX480 PICs

Problem
Description: The PICs are not functioning normally.
Solution
Check the status of each port on a PIC by looking at the LED located on the PIC faceplate. For information
about the meaning of LED states on different PICs, see the
Check the status of a PIC by issuing the show chassis fpc pic-status CLI command. The PIC slots in the
FPC are numbered from 0 through 1, left to right:
265 Watts
Online
36 degrees C / 96 degrees F
2048 MB
806 MB
2632 MB
2009-12-22 12:27:04 PST
6 days, 3 hours, 8 minutes, 41 seconds
450 Watts
Online
40 degrees C / 104 degrees F
2048 MB
1324 MB
5120 MB
2009-12-22 12:27:02 PST
6 days, 3 hours, 8 minutes, 43 seconds
440 Watts
MX Series Interface Module
446
Reference.