Replacing An Mx480 As Msc - Juniper MX480 Hardware Manual

For more information about the command, see the
CAUTION:
removing the AS MLC again, removing an AS MLC from a different slot, or
inserting an AS MLC in a different slot.
You can also verify correct AS MLC and AS MSC or AS MXC functioning by issuing the show chassis fpc
and show chassis fpc pic-status.
Figure 134: Installing an AS MLC

Replacing an MX480 AS MSC

Removing an MX480 AS MSC | 379
1.
Installing an MX480 AS MSC | 380
2.
After the OK LED lights steadily, wait at least 30 seconds before
SC B
SC B
CLI Explorer.
M X4 80
378