Attach Crowsnest Assembly - KidKraft COZY ESCAPE PLAYHOUSE F29045 Installation And Operating Instructions Manual

Step 11: Attach Crowsnest Assembly
Part 1
A: With a helper, stand the Crowsnest Assembly upright, in front of the fort. Measure to make sure that there is a
21" space between the fort and the outside of (9499) Crowsnest Bottom, as shown in fig. 11.3 & 11.4.
B: Place 1 (9498) Crowsnest Short L across the opening from the fort to the (9494) Crowsnest Upright so that it's
flush to the outside edge and the bottom of the lower (9499) Crowsnest Bottom (fig. 11.2). Check to make sure the
board is level, then attach using 4 (S3) #8 x 2- 1/2" Wood Screws. (fig. 11.1 & 11.2 )
Fig. 11.1
9494
Wood Parts
1 x Crowsnest Short L 1-1/4 x 2-1/2 x 22-5/16"
9498
9499
Fig. 11.3
Hardware
4 x #8 x 2-1/2" Wood Screw
S3
Fig. 11.2
S3
x 6
9498
Fig. 11.4
38
21
9499
Flush
S3
9494
21" (533mm)
21
534