KidKraft COZY ESCAPE PLAYHOUSE F29045 Installation And Operating Instructions Manual page 63

Step 29: Small Roof Panel Assembly
Part 2
Important: Do not over tighten hardware
E: Slide 1124 x 650mm Roof Panel under (9512) Roof Cover so that it's tight to (9508) Roof Sleeper. (fig.29.6 &
29.9)
F: Place 370 x 650mm Roof Panel in the remaining opening, under (9512) Roof Cover. The inside edge should
overlap the Large Roof panel with the pre-drilled holes lining up. (fig. 29.6 & 29.7 & 29.8 & 29.9)
G: Pre-drill each hole using a 1/8" drill bit, place Special Weather Cap brackets over each hole in the Roof Panels
then attach using 1 (S2) #8 x 1-1/2" Wood Screw per bracket. Press the Special Weather Cap over the top of each
screw. (fig. 29.6 & 29.7 & 29.8)
Fig. 29.6
9508
Fig. 29.7
Special
Weather
Caps
9512
Fig. 29.9
S2
10 x
1"
(2.54cm)
Hardware
#8 x 1-1/2" Wood Screw
S2
63
x 10
S2
Fig. 29.8
S2
Special
Weather
Caps
Other Parts
1 x 1124 x 1067mm Roof Panel
1 x 370 x 650 Roof Panel
10 x Special Weather Caps