Crowsnest Assembly - KidKraft COZY ESCAPE PLAYHOUSE F29045 Installation And Operating Instructions Manual

Step 10: Crowsnest Assembly
A: Lay flat 2 (9494) Crowsnest Uprights taking note of the hole orientation. Place 2 (9499A) Crowsnest Bottoms
over the top two sets of pre-drilled holes as shown in ( Fig.10.1). Attach using 2 (H3) 1/4 x 2-1/2" Hex Bolts (with
flat washer, lock washer and t-nut) per board. (Fig. 10.1)
B: Place (9499) Crowsnest Bottom over the bottom set of pre-drilled holes, attach using 2 (H3) 1/4 x 2-1/2" Hex
Bolts (with lock washer, flat washer and t-nut). (Fig. 10.1)
Fig. 10.1
1/4" Lock
Washer
1/4" Flat
Washer
1/4"
T-Nut
Wood Parts
1 x Crowsnest Bottom 1-1/4 x 2-1/2 x 57-11/64"
9499
2 x Crowsnest Bottom 1-1/4 x 2-1/2 x 57-11/64"
9499A
2 x Crowsnest Upright 1-1/4 x 2-1/2 x 90"
9494
H3
9499A
6 x
H3
1/4"
T-Nut
9499
Hardware
1/4 x 2-1/2" Hex Bolt
H3
(1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
37
1/4" Lock
Washer
1/4" Flat
Washer
9494