KidKraft COZY ESCAPE PLAYHOUSE F29045 Installation And Operating Instructions Manual page 17

Step 2: Frame Assembly
Part 2
C: With a helper, stand the (9264) Folding Panel Assembly Left A in the upright position and unfold, checking to
make sure the panel assembly is square. Pre-drill using a 3/16" drill bit, then install 5 (WL5) 1/4 x 2- 1/2" Wafer
Lags to secure the panel. (fig 2.2)
D: Repeat step C to secure the (9266) Folding Panel Assembly Right B. (fig 2.2)
Fig. 2.2
WL5
9264
Wood Parts
1 x Folding Panel Assembly Left A 2-1/2 x 22 x 90"
9264
1 x Folding Panel Assembly Right B 2-1/2 x 34-1/4 x 90"
9266
9266
Hardware
10 x 1/4 x 2-1/2" Wafer Lag
WL5
17
WL5