Step 25: Roof Support Assembly
Part 2
A: Center 1 Triangle Canopy over the inside of each Roof Support Assembly. Make sure canopy is pulled tight
during the installation. Attach using 10 (S5) #8 x 1/2" Pan Screws (#8 flat washer) per canopy. (Fig. 25.2)
Fig. 25.2
Triangle
Canopy
Set
Hardware
20 x
#8 x 1/2" Pan Screw (#8 flat washer)
S5
57
w/#8 flat
S5
washer
x 10
Other Parts
1 x Cozy Escape
Triangle Canopy Set