KidKraft COZY ESCAPE PLAYHOUSE F29045 Installation And Operating Instructions Manual page 61

Step 28: Large Roof Panel Assembly
Part 2
Important: Do not over tighten hardware
E: Slide 1124 x 1067mm Roof Panel under (9520) Roof Cover so that it's tight to (9519) Roof Sleeper Right. (Fig.
28.5 & 28.8)
F: Place 370 x 1067mm Roof Panel in the remaining opening, under (9520) Roof Cover. The inside edge should
overlap the Large Roof panel with the pre-drilled holes lining up. (Fig. 28.5 & 28.6 & 28.7 & 28.8)
G: Pre-drill all holes using a 1/8" drill bit, place Special Weather Cap brackets over each hole in the Roof Panels
then attach using 1 (S2) #8 x 1-1/2" Wood Screw per bracket. Press the Special Weather Cap over the top of each
screw.
Fig. 28.6
S2
Fig. 28.5
x 10
S2
Special
Weather
Caps
10 x
Small Roof
9520
9519
Fig. 28.8
add to pg 61 of V6
1"
(2.54cm)
Hardware
#8 x 1-1/2" Wood Screw
S2
61
Large Roof
Fig. 28.7
Special
Weather
Caps
Other Parts
1 x 1124 x 1067mm Roof Panel
1 x 370 x 1067mm Roof Panel
10 x Special Weather Caps
S2