Step 16: Attach Crowsnest Gusset
A: On the underside of one end of the deck assembly, place 1 (9495) Crowsnest Gusset as shown in (fig.16.2).
One end of the Gusset should be flat against (9465) Side Joist-1 and the other end should be flush with the front
edge of (9494) Crowsnest Upright. Attach using 2 (S3) #8 x 2-1/2" Wood Screws. (fig.16.1 and 16.2)
B: Repeat to install a second (9495) Crowsnest Gusset on the opposite side. (fig.16.1 and 16.2)
Fig. 16.1
Fig. 16.2
9499
9465
9495
S3
Flush
9494
9495
Wood Parts
Hardware
2 x
Crowsnest Gusset 1 x 2 x 12"
4 x
#8 x 2-1/2" Wood Screw
9495
S3
44