Commissioning instructions
How to back up all system configuration and labels to a SD card
The system configuration data and labels can be backed up to a SD card. You will need to be at access level 4 to perform this back up.
Menu
Engineering
Maintenance >
Select
Ensure the SD card is fitted into the
Main Controller Board
How to back up all labels to a SD card
The system labels can be backed up to a SD card. You will need to be at access level 4 to perform this back up.
Menu
Engineering
Maintenance >
Select
Ensure the SD card is fitted into the
Main Controller Board
68
Select
SD Card
Select
DO NOT remove the SD card
while the RED LED is flashing.
RED LED
Select
SD Card
Select
DO NOT remove the SD card
while the RED LED is flashing.
RED LED
Select
Select
Backup
All
SD card
Backup
Select
Labels
Select
SD card
16:15 Tue 16/02/10
This will overwrite the configuration
data on your SD card!!
Yes
Are you sure?
Yes
No
Main Control board
16:15 Tue 16/02/10
This will overwrite the label
data on your SD card!
Yes
Are you sure?
Yes
No
Main Control board
4188-949 issue 3_05/10_Nano Comms inst.