Installing Pro9000 Software; System Configuration - Honeywell Intelliguard 9000 Programmer's Manual

INTELLIGUARD 9000
Programming the I9000 Security System begins with installing PRO9000 software
on a PC.
PRO9000 requires the following hardware:
• IBM compatible PC with 386 and later.
• 3-1/2 in. floppy drive
• 256 KB conventional plus 1 MB extended memory.
• 1.5 MB free disk space.
• 1 serial port for communication with I9000 Control Unit (CU).
• Color Graphics Adapter (CGA) or better video graphic adapter.
PRO9000 runs in DOS 5.0 and higher or Windows 95. This procedure assumes you
have Windows 95.
1. Place Disk 1 into the A drive.
2. Click Start to display the Start menu.
3. Click Run to display the Run dialog box.
4. Click Browse.
5. Click Install.exe to install the software on your PC.
1. Click Start to display the Start pop-up menu.
2. Click Programs to display the list of programs.
3. Click MS-DOS Prompt to open a DOS shell.
4. Type cd...
5. Type cd pro9000.
6. Type pro9000.
The PRO9000 main menu appears.
5

INSTALLING PRO9000 SOFTWARE

System Configuration

STARTING PRO9000
Installation
74-3046