Table of Contents
Advertisement
Commissioning instructions
How to set up 'Maintenance visit reminder'
The maintenance visit reminder will appear on the display to remind responsible person(s) to arrange for the system to be maintained by the servicing organisation. The message is displayed at the
beginning of the reminder day and is automatically removed after 7 days. You will need to be at access level 4 to set up the reminder.
Menu
Engineering
Select
After making changes to this form you will need to back-up the data to
memory. Ensure the write protect link P9 on the MCB is configured in
the ENABLED position to allow back-up of data.
How to return 'System Configuration' to factory default settings
It is possible to reset the system configuration to factory default settings. You will need to be at access level 4 to use this function.
Menu
Engineering
Select
After configuration has been reset you will need to back-up the data to
memory. Ensure the write protect link P9 on the MCB is configured in
the ENABLED position to allow back-up of data.
64
Maintenance >
Select
Select
Reminders
! " # $ % & ' ( ) * + , - . / 0 1 2 - - 8 9
: ; < = > ? @ A B C - - w x y z [ \ ] ^
_ ` a b c - - -w x y z { | } ~ SPACE
System
>
Select
Select
Default
Set Maintenance visit reminder to 'ON'
or 'OFF'(factory setting)
Maintenance visit reminder is
Select
Select
Interval:
Next visit - Day: [ 7]
Reminder message set to:
Line 1: [MAINTENANCE VISIT DUE
Line 2: [PLEASE CALL FOR SERVICE
Save
Use these keys to
scroll the alphanumeric
character set.
Config
>
Select
Select
After the configurations are reset you will need to power
down and power up the panel.
Select the maintenance visit interval:
MONTHLY
QUARTERLY
HALF YEARLY
or YEARLY
10:15 Tue 16/02/10
:
[OFF]
[QUARTERLY]
Month: [ 1]
]
Save
]
Quit
Set Day and Month of maintenance visit
Enter the Maintenance visit reminder message
To move to
next character
position
To scroll range
16:15 Tue 16/02/10
WARNING! - This will reset the
configuration to factory defaults!!
ARE YOU SURE YOU WISH TO PROCEED?
Select
Select
Yes
Note: Only the labels are retained.
4188-949 issue 3_05/10_Nano Comms inst.
To move to
next setting
Yes
No
Hide quick links:
Advertisement
Table of Contents
