Preliminary Information; Safety Information; Abbreviations - Honeywell GENT Nano panel-based Commissioning Instructions

Preliminary information

Safety information

&
1. Do not remove or replace printed circuit boards, fuses or attempt to wire the
control panel with the panel powered up. Always power down the mains supply
at the fused spur unit and disconnect the battery supply before working on the
panel.
2. When replacing a printed circuit board assembly from the panel always use
antistatic work procedures.
3. Do not use antistatic procedures on live equipment.
4188-949 issue 3_05/10_Nano Comms inst.

Abbreviations

C - Common
CH -channel
Dv - Device (Loop device, also called outstation)
EOL - End of line
IO or I/O - Input Output (Interface unit)
IP - Ingress protection
LED - Light emitting diode
MCB - Main control board (also called MC - Main Controller)
MCP - Manual call point
N/C or NC - Normally closed
N/O or NO - Normally open
NVM - Non Volatile Memory
O/C or OC - Open circuit
PC - Personal computer
PCB - Printed circuit board
PIN - Personal identification number
(usercode, password, access code)
PSU - Power supply unit
PVC - Polyvinyl chloride
QB - Quick blow (fuse)
S/C or SC - Short circuit
T - Anti-surge (fuse)
USB - Universal serial bus
Nano panel based system
5