Barco Dpms Screen Saver Installation - Barco Coronis 5MP System Manual

Wizard, click "Cancel"
want to cancel the DPMS installation, click "Y "Y "Y "Y "Yes"
"Finish" "Finish" "Finish". The BARCO DPMS InstallShield Wizard will exit and "Finish" "Finish"
return to the BarcoMed Product Install Wizard Welcome Screen.
The wizard will automatically launch the CORONIS Rotation
Service Install Wizard, click "Cancel"
confirm that you want to exit the CORONIS Rotation Service setup,
click "Exit Setup".
BarcoMed Product Installation Wizard. Then click "Back"
reinstalling the drivers following the steps above or using the steps
outlined in "Reinstalling or Updating your BarcoMed Drivers"
section found later in this chapter.
After returning to the BarcoMed Product Install Wizard Welcome
Screen, the wizard will clear the checkbox next to the BarcoMed
Driver and automatically launch the BARCO DPMS InstallShied
Wizard.

BARCO DPMS Screen Saver Installation

BARCO DPMS Screen Saver Installation BARCO DPMS Screen Saver Installation
BARCO DPMS Screen Saver Installation BARCO DPMS Screen Saver Installation
9. Click "Next"
InstallShied Wizard to begin the installation. Click "Cancel"
cancel the DPMS installation and return to the BarcoMed Product
Install Wizard (figure 16 on the next page).
System manual Coronis 5MP
"Cancel" "Cancel". The wizard will ask you to confirm that you "Cancel"
"Cancel"
"Exit Setup". The wizard will exit and return you to the "Exit Setup". "Exit Setup".
"Exit Setup".
"Next" "Next"
"Next" on the Welcome Screen of the BARCO DPMS "Next"
BarcoMed software driver installation
"Cancel" "Cancel"
"Cancel". The wizard will ask you to "Cancel"
Figure 15
es" and then click es" es"
es"
"Back" and try "Back" "Back" "Back"
"Cancel" to "Cancel" "Cancel"
"Cancel"
53