Barco Coronis 5MP System Manual

Hide thumbs Also See for Coronis 5MP:

Installation & user manual (139 pages)

Getting started manual (88 pages)

User manual (88 pages)

Table of Contents

Quick Links

Download this manual See also: User Manual, Installer and User Manual

B4100257 / 05

November 2003

BarcoView

Theodoor Sevenslaan 106

8500 Kortrijk, Belgium

Phone: +32(0)56 23 32 44

Fax: +32(0)56 23 33 74

E-mail: sales.medical@barco.com

http://www.barcoview.com

BarcoView Inc

3059 Premiere Parkway

Duluth, Georgia, 30097,USA

Phone: +1 678 475 8000

Fax: +1 678 475 8100

E-mail: sales.medical@barco.com

http://www.barcoview.com

BarcoView L

BarcoV

iew L

iew LTD

16F-1, Cheng Loong Plaza 33, Min Sheng Road

Section 1, Pan Chiao, Taipei Hsien, Taiwan, R.O.C.

Phone: +886 2 2957 8357

Fax: +886 2 2957 4080

CORONIS

® ® ® ® ®

5MP

System Manual

Table of Contents

Need help?

Do you have a question about the Coronis 5MP and is the answer not in the manual?

Questions and answers

Summary of Contents for Barco Coronis 5MP

Page 1 B4100257 / 05 November 2003 © 2003 BARCO NV. All rights reserved BarcoView BarcoView BarcoView CORONIS CORONIS CORONIS BarcoView BarcoView CORONIS CORONIS ® ® ® ® ® Theodoor Sevenslaan 106 8500 Kortrijk, Belgium Phone: +32(0)56 23 32 44 Fax: +32(0)56 23 33 74 E-mail: sales.medical@barco.com...
Page 2: Table Of Contents
Display installation ..................Display installation Display installation ........................................................................ 21 Safety instructions .................... 23 Overview ......................24 Introduction ....................24 Package contents ..................25 Controls and connectors ................25 Front ......................25 Side ......................26 System manual Coronis 5MP...
Page 3 Panel ......................39 Cabinet ..................... 39 To remove the glass panel: ..............39 Cleaning instructions: ................39 Troubleshooting ....................40 Windows does not show the desired display settings ........40 Pixel Faults ....................40 Technical specifications ..................41 System manual Coronis 5MP...
Page 4 Installing the BarcoMed 5MP2F Windows NT 4.0 Software ......47 Using the BarcoMed Product Installation Wizard ........47 Driver Installation ..................49 BARCO DPMS Screen Saver Installation ..........53 CORONIS Rotation Service Installation ..........56 Reinstalling the BarcoMed Driver ............60 Setting the Resolution of Your CORONIS Display Panel ......
Page 5 Amount of Time in each DPMS State ............ 127 Monitor Settings ..................128 Use As Logon Screen Saver ..............128 Getting started with the BARCO DPMS Screen Saver ......128 Using the BARCO DPMS Screen Saver ........... 129 Installing or Reinstalling BARCO DPMS ............ 134 Uninstalling BARCO DPMS ................
Page 6: Introduction
INTRODUCTION INTRODUCTION INTRODUCTION INTRODUCTION INTRODUCTION System manual Coronis 5MP...
Page 7 Introduction (This page intentionally left blank.) System manual Coronis 5MP...
Page 8: Introduction
INTRODUCTION INTRODUCTION BARCO Coronis is a total display solution for medical applications. ® Coronis 5MP can be a single-head or multi-head system. Coronis comes with everything you need to set-up a complete viewing system, from cables to displays. Content Content...
Page 9: Coronis Installation Overview
To install the Coronis system completely, you have to follow these steps: 1 Install the imaging board(s) in the PC 2 Install and connect the displays to the PC 3 Install the Coronis driver software 4 Install the MediCal software 5 Use MediCal System manual Coronis 5MP...
Page 10: Imaging Board Installation
IMAGING BOARD IMAGING BOARD IMAGING BOARD IMAGING BOARD IMAGING BOARD INST INST ALLA ALLA TION TION INST ALLA ALLA TION TION INST INST ALLA TION System manual Coronis 5MP...
Page 11 Imaging board installation (This page intentionally left blank.) System manual Coronis 5MP...
Page 12: 5Mp2F Product Overview
• 2048 x 2560 @ 60 HZ (primary) • 2560 x 2048 @ 60 Hz The following resolution is also available when the OS is booted in VGA mode. • 640x480 @ Default Refresh Rate, 16 colors System manual Coronis 5MP...
Page 13: System Configuration Guidelines
Because of the low power consumption and low heat generation of the 5MP2F, multiple controllers may be installed in adjacent PCI slots or adjacent to other PCI boards. Additionally there should be no need to modify either the PC’s power supply and/or cooling system. System manual Coronis 5MP...
Page 14: Important Installation Considerations
To install the BarcoMed Display Controllers in your system, you have to follow these steps: 1 Install the display controller(s) in the PC 2 Install and connect the displays to the display controller(s) 3 Install the BarcoMed Display Controller Driver software System manual Coronis 5MP...
Page 15 Imaging board installation (This page intentionally left blank.) System manual Coronis 5MP...
Page 16: Hardware Installation
Using the VGA Capabilities of the BarcoMed 5MP2F Using the VGA Capabilities of the BarcoMed 5MP2F Prior to installing the BarcoMed 5MP2F, decide if you are going to use its on-board VGA capabilities. If you are, check the setting of the System manual Coronis 5MP...
Page 17: Examples Of Pci Slots
Installing the BarcoMed 5MP2F Graphics Controller Installing the BarcoMed 5MP2F Graphics Controller Installing the BarcoMed 5MP2F Graphics Controller Installing the BarcoMed 5MP2F Graphics Controller Installing the BarcoMed 5MP2F Graphics Controller Install the 5MP2F into your computer following these steps: System manual Coronis 5MP...
Page 18 VID 1 headed 5MP2F setup, connect the secondary display to the other connector on the display controller. 7. Reconnect the power cord, turn on the power, and boot the system as usual. Figure 4: The Video Outputs. System manual Coronis 5MP...
Page 19: Running Multiple Barcomed 5Mp2F Display Controllers In A Single Host20
PCI bus control in the system BIOS, and not the BarcoMed display controller. It may become necessary, depending on how your PC’s BIOS configures the PCI bus, to switch your DVI display connections to achieve a linear desktop configuration. System manual Coronis 5MP...
Page 20 DISPLA DISPLA Y Y Y Y Y DISPLA DISPLA DISPLA INST INST ALLA ALLA TION TION INST ALLA ALLA TION TION INST INST ALLA TION System manual Coronis 5MP...
Page 21: Display Installation
Display installation (This page intentionally left blank.) System manual Coronis 5MP...
Page 22: Safety Instructions
The 12 VDC power supply must be powered equipment. by the AC mains voltage. More warnings in the Installation chapter. System manual Coronis 5MP...
Page 23: Overview
Introduction Introduction Introduction Introduction The MFGD 5421, BARCO’s 21.3” 5 megapixel greyscale LCD display, guarantees perfect image quality in medical imaging applica- tions. The display combines a TFT (thin film transistor) liquid crystal display panel structure and a built-in backlight with inverter for a better picture quality.
Page 24: Package Contents
The LED is also off when the display is on but the LED is disabled in the on-screen menus. The LED is green when the display is on. The LED is orange when the display is in Stand-by power-saving mode. System manual Coronis 5MP...
Page 25: Side
(3) USB downstream connector Rear Rear Rear Rear Rear Input panel at the rear DC 12V power input Digital DVI (video and data) input USB upstream connector USB downstream connector System manual Coronis 5MP...
Page 26: Precautions
3 Pull the lower side of the cover towards you and simultaneously slide the cover downward. 4 Pull the red strap out of the fixation holes in the foot. You can better leave the cover off the foot while connecting the signal cables to the display. System manual Coronis 5MP...
Page 27: Portrait Or Landscape Position
2 Connect the other end of the DVI cable to the video output of your DVI signal source. 3 Route the cable so that it enters the connector compartment at the place where the cover is bulged. System manual Coronis 5MP...
Page 28: Routing The Signal Cables
2 Slide the cover upward while moving the lower side of the cover towards the foot. 3 Press the cover to the foot so that both clips make a clicking sound. System manual Coronis 5MP...
Page 29: Using The Usb Hub
S S S S S t t t t t arting up arting up arting up arting up arting up Proceed as follows: 1 Switch on the signal source (E.g., PC). 2 If necessary, select a suitable resolution or signal format for the signal source. System manual Coronis 5MP...
Page 30: Operation
• To exit from a menu or move to a higher level of the menu structure, turn the control wheel to select EXIT EXIT EXIT. Next, click the EXIT EXIT control wheel shortly. If you do this when you are in the Main Menu, you exit the menu system. System manual Coronis 5MP...
Page 31: Saving Changes
5 Turn the control wheel to adjust the Luminance Target value. 6 Click the control wheel to confirm the adjustment. 7 Turn the control wheel to select Exit. 8 Click the control wheel to return to the main menu. System manual Coronis 5MP...
Page 32: Settings
SW version: .... Displays the current internal software version Display Lifetime: ..Indicates the total time the display has been operating, including the time in stand-by Backlight Lifetime: ... Indicates the total time the display has been operating, excluding the time in stand-by System manual Coronis 5MP...
Page 33: Advanced Functions
The functions described in this chapter are intended for trained service staff only! Improper use of these functions may irreversibly damage the display. BARCO cannot be held responsible for the results or damage caused by improper use of these functions. This chapter describes only the Advanced...
Page 34: Advanced Functions In The Luminance Menu
Burn-In Mode ..When switched on, the display will generate a white image when the video cable is unplugged Import Import ant: ant: Import Import Important: ant: ant: Disabling the I-Guard results in an uncontrolled image performance. System manual Coronis 5MP...
Page 35: Advanced Functions In The Information Menu
(so, the total backlight lifetime) Backlight Runtime ... Indicates the time the backlight has been on since the last time it was switched off. This counter is reset to 0 after 1092 minutes. System manual Coronis 5MP...
Page 36: Measurements
Vert.Front Porch: ..The vertical front porch of the input signal Vert.Sync: ....The vertical sync length of the input signal Vert.Back Porch: ..The vertical back porch of the input signal Vert.Frequency: ..The vertical frequency of the input signal System manual Coronis 5MP...
Page 37: Advanced Functions In The Adjustments Menu
RS232 Address ..Turn the control wheel to change the internal display address. RS232 Timeout ..Turn the wheel to change the communication timeout. This is the time the display will try to maintain communication with the PC. System manual Coronis 5MP...
Page 38: Maintenance
It may be possible that dust particles have entered the display and are stuck to the rear of the glass. We recommend to let this cleaning procedure be done in a BARCO service center. However, when really necessary, you can perform the cleaning on site if you can work in conditions that are as clean and dust-free as possible.
Page 39: Troubleshooting
Permanently dark or bright pixels can happen to TFT displays. 20 or less permanently dead pixels do not make out a good case for exchanging the unit. Please contact our Customer Service Department if the number of pixel faults exceeds the above-mentioned figure. System manual Coronis 5MP...
Page 40: Technical Specifications
Luminance Luminance Luminance Luminance Luminance • Calibrated: 500 cd/m2 (145.9 fL) Resolution Resolution Resolution Resolution Resolution • Up to 2560 x 2048 (5.2 MegaPixel) INPUTS INPUTS INPUTS INPUTS INPUTS • Complies to DVI Rev. 1.0 spec System manual Coronis 5MP...
Page 41 Due to our policy of continuous product improvement, the above specifications are Due to our policy of continuous product improvement, the above specifications are subjected to change without notice. Barco shall not be liable for technical or subjected to change without notice. Barco shall not be liable for technical or subjected to change without notice.
Page 42: Barcomed Software Driver Installation
BARCOMED BARCOMED BARCOMED BARCOMED BARCOMED SOFTW SOFTW ARE DRIVER ARE DRIVER SOFTW ARE DRIVER ARE DRIVER SOFTW SOFTW ARE DRIVER INST INST ALLA ALLA TION TION INST ALLA ALLA TION TION INST INST ALLA TION System manual Coronis 5MP...
Page 43 BarcoMed software driver installation (This page intentionally left blank.) System manual Coronis 5MP...
Page 44: Software Installation
Note: The CORONIS Rotation Service requires the Portrait Accelerator (PA) Option in order to function. The PA is included with the CORONIS 5MP & 3MP Flat Panel Displays and is available as an option for the CORONIS 1MP and 2MP Flat Panel Displays.
Page 45 BarcoMed software driver installation use the BarcoMed Software Installation Wizard to reinstall either the BarcoMed Display Controller Drivers or CORONIS Rotation Service and/or modify, repair or remove the BARCO DPMS Screen Saver from must must his system. The BarcoMed Display Controller Driver must...
Page 46: Installing The Barcomed 5Mp2F Windows Nt 4.0 Software
Using the BarcoMed Product Installation Wizard To install your BarcoMed 5MP2F Windows Display Controller Driver, BARCO DPMS Screen Saver and CORONIS Rotation Service for the first time follow the steps below. If you are reinstalling the drivers or installing a new driver release over an existing driver release, skip step 1 below: 1.
Page 47 If you click “Inst “Inst “Inst “Install” “Inst all” all” all” all” the wizard will begin installing the selected software. The wizard will install the software in the order listed on the Wizard’s Welcome Screen. System manual Coronis 5MP...
Page 48: Driver Installation
If you choose “No” “No” “No”, the Wizard will continue normally. If you choose “Y “Y “Y “Y “Yes” es” es”, the es” es” Wizard will exit and return you to the Barco Software Install System manual Coronis 5MP...
Page 49 BarcoMed software driver installation Wizard. The wizard will then begin to install the next piece of software that was selected when you initially launched the Barco Software Install Wizard. If no additional pieces of software were selected, “Finish” “Finish” you may either click “Finish”...
Page 50 Note: Once you click “Next”, “Next”, “Next”, you cannot cancel the driver “Next”, pecial Note: “Next”, installation. Figure 12 During the BarcoMed driver installation, the install progress window is displayed (figure 13 on the next page). System manual Coronis 5MP...
Page 51 “Cancel” “Cancel” will also return you to the “Cancel” “Cancel” BarcoMed Product Install Wizard, but will not delete the Barco Display Drivers. Figure 14 If the Wizard failed to successfully install the drivers for all of the displays supported by your BarcoMed Display Controller(s), the Wizard will advise you that the installation failed (see figure 15 on “Finish”...
Page 52: Barco Dpms Screen Saver Installation
DPMS installation, click “Y “Y “Y “Y “Yes” es” es” and then click es” es” “Finish” “Finish” “Finish”. The BARCO DPMS InstallShield Wizard will exit and “Finish” “Finish” return to the BarcoMed Product Install Wizard Welcome Screen. The wizard will automatically launch the CORONIS Rotation “Cancel” “Cancel”...
Page 53 German names. Currently the default schemes are not supported in the Japanese, Korean and Chinese languages. We recommend that the users of these three languages install the English default schemes and then rename and save them into their System manual Coronis 5MP...
Page 54 “Installshield Wizard Completed” page will appear (see figure 20 “Finish” “Finish” on the next page). Click “Finish” “Finish” “Finish” to exit the BARCO DPMS InstallShied Wizard and return to the BarcoMed Product Install Wizard Welcome Screen. System manual Coronis 5MP...
Page 55: Coronis Rotation Service Installation
“Next” Service InstallShied Wizard to begin the installation. Click “Cancel” “Cancel” “Cancel” to cancel the CORONIS Rotation Service installation “Cancel” “Cancel” and return to the BarcoMed Product Install Wizard (see figure 21 on the next page). System manual Coronis 5MP...
Page 56 Rotation Service InstallShield Wizard (figure 22). Click “Next” “Next” “Next” “Next” to “Next” continue the installation. Figure 22 16. Click “Next” “Next” “Next” on the “Setup has enough information” screen to “Next” “Next” continue (figure 23 on the next page). System manual Coronis 5MP...
Page 57 Figure 24 “Finish” “Finish” Click “Finish” “Finish” “Finish” to exit the BarcoMed Product Installation Wizard or click “Back” “Back” “Back” if you wish to install additional BarcoMed software “Back” “Back” (figure 25 on the next page). System manual Coronis 5MP...
Page 58 19. When your computer restarts, select “NT “NT ersion 4.0 (VGA ersion 4.0 (VGA Mode)” Mode)” Mode)” Mode)”. Log in using an account with administrator privileges and Mode)” set the resolution of your CORONIS Display Panel(s). System manual Coronis 5MP...
Page 59: Reinstalling The Barcomed Driver
1. Skip Step 1. 2. In Step 4, clear the checkboxes next to the BARCO DPMS and the CORONIS Rotation Service. “Finish” “Finish” 3. When the driver has finished installing, click “Finish” “Finish”...
Page 60 3. Select a resolution from the list that is correct for the maximum number of display adapters installed even if you will later configure for less than the maximum number of displays supported by your configuration. (See table on following page for examples.) System manual Coronis 5MP...
Page 61 If you wish to change the number of CORONIS display panels you are “BarcoMed Driver “BarcoMed Driver “BarcoMed Driver T T T T T ab” ab” ab” using, this can be done using the “BarcoMed Driver “BarcoMed Driver ab” ab” of the Windows Display Control Panel. System manual Coronis 5MP...
Page 62: Installing The Barcomed 5Mp2F Windows 2000 Software
VGA monitor during the Windows 2000 installation process. To install your BarcoMed 5MP2F Windows Display Controller Driver, BARCO DPMS Screen Saver and CORONIS Rotation Service for the first time follow the steps below. If you are reinstalling the drivers or...
Page 63 Microsoft Installer. Figure 29 The BarcoMed Product Installation Wizard will advise you when it has successfully installed the new version of the Microsoft Installer (figure 30). Click “OK” “OK” “OK” “OK” to continue. “OK” System manual Coronis 5MP...
Page 64 “Inst “Inst “Install” all” all” on the Wizard’s Welcome Screen to continue or “Cancel” “Cancel” “Cancel” “Cancel” to exit the wizard. “Cancel” “Cancel” “Cancel” If you click “Cancel” “Cancel” “Cancel” the wizard will exit. System manual Coronis 5MP...
Page 65: Driver Installation
“Next” “Next” on the Display Driver Wizard’s Welcome Screen “Cancel” “Cancel” (figure 33 on the next page) to continue or “Cancel” “Cancel” “Cancel” to exit the Display Driver Wizard and return to the Software Install Wizard. System manual Coronis 5MP...
Page 66 Barco graphics device driver on your CORONIS Software CD (see figure 35 onthe next page). If there are no Barco devices installed or if the driver on your CORONIS Software CD does not support the installed devices, the dialog box will be empty, and program will exit when “Finish”...
Page 67 DualView is a feature that is automatically supported by Windows XP. However, BARCO has provided a means for you to enable this functionality while running Windows 2000. Figures 37 and 38...
Page 68 BarcoMed software driver installation on the next page shows the difference between running without and with DualView enabled under Windows 2000. Figure 37: DualView Disabled Figure 38: DualView Enabled System manual Coronis 5MP...
Page 69 “Cancel” and the “Cancel” “Cancel” wizard will exit. S S S S S pecial Note: pecial Note: pecial Note: pecial Note: Once you click “Next”, “Next”, “Next”, you cannot cancel the driver “Next”, pecial Note: “Next”, installation System manual Coronis 5MP...
Page 70 Wizard will warn you that while the driver is being installed your display may flicker. Click “OK” “OK” “OK” “OK” to continue (see figure 41). “OK” Figure 41 12. While the driver is being installed, the screen shown in figure 42 will be visible. System manual Coronis 5MP...
Page 71 “Finish” to finish installing the display drivers “Finish” and return to the BarcoMed Product Install Wizard. Clicking “Cancel” “Cancel” will also return you to the BarcoMed Product Install “Cancel” “Cancel” “Cancel” Wizard, but will not delete the Barco Display Drivers. System manual Coronis 5MP...
Page 72 After returning to the BarcoMed Product Install Wizard Welcome Screen, the wizard will automatically begin installing the next selected piece of BarcoMed Software. If you are working with the default selections, this will be the BARCO DPMS InstallShield Wizard, click “Cancel” “Cancel”...
Page 73: Barco Dpms Screen Saver Installation
BARCO DPMS Screen Saver Installation BARCO DPMS Screen Saver Installation BARCO DPMS Screen Saver Installation 15. Click “Next” “Next” “Next” on the Welcome Screen of the BARCO DPMS “Next” “Next” InstallShield Wizard to begin the installation. Click “Cancel” “Cancel” “Cancel”...
Page 74 English default schemes and then rename and save them into their language in the DPMS configuration screen. Click “Next” “Next” “Next” “Next” to continue (see “Next” figure 48). Figure 48 System manual Coronis 5MP...
Page 75 “Finish” “Finish” “Finish” “Finish” to exit the BARCO DPMS InstallShield Wizard and return to the BarcoMed Product Install Wizard Welcome Screen (see figure 50). Figure 50 After returning to the BarcoMed Product Install Wizard Welcome Screen, the wizard will clear the checkbox next to DPMS Screen...
Page 76: Coronis Rotation Service Installation
CORONIS Rotation Service in a different location use the “browse” “browse” “browse” “browse” button on the Install Location Screen of the CORONIS “browse” Rotation Service InstallShield Wizard (figure 52 on the next page). “Next” “Next” Click “Next” “Next” “Next” to continue the installation. System manual Coronis 5MP...
Page 77 “Finish” “Finish” to complete the setup (figure 54 on the next page). Click “Finish” “Finish” “Finish” “Finish” “Finish” to exit the CORONIS Rotation Service InstallShield “Finish” Wizard and to return to the BarcoMed Product Installation Wizard. System manual Coronis 5MP...
Page 78 Windows may now warn you that you must restart your computer before the new settings will take effect (figure 56 on the next page). Click “Yes” to restart your computer now. Click “No” if you wish to restart your computer later. System manual Coronis 5MP...
Page 79 BarcoMed software driver installation Figure 56 System manual Coronis 5MP...
Page 80: Setting The Resolution Of Your 5Mp Coronis Display Panel With Dualview Disabled
3. Select the “Adapter” “Adapter” “Adapter” “Adapter” tab and then click on the “List “Adapter” “List “List “List “List All Modes…” All Modes…” All Modes…” All Modes…” All Modes…” button. Select the desired resolution and refresh rate that your System manual Coronis 5MP...
Page 81 5. Click “Y “Y “Y “Y “Yes” es” es” es” es” when asked, “Your desktop has been reconfigured. Do you want to keep these settings?” Repeat steps 1 – 5 for each BarcoMed Display Controller installed in your system. System manual Coronis 5MP...
Page 82: Setting The Resolution Of Your Coronis Display Panel With Dualview Enabled
Your high resolution display(s) should now synchronize and display the Windows desktop. 7. Click “Y “Y “Y “Y “Yes” es” es” es” es” when asked, “Your desktop has been reconfigured. Do you want to keep these settings?” System manual Coronis 5MP...
Page 83 After installing DualView use the BarcoMed Driver Tab of the “Display Properties Control Panel” to verify or change your system settings. Figure 58: The Windows 2000 Display Properties Control Panel Settings Tab after the drivers have been installed and the resolution set with DualView Enabled. System manual Coronis 5MP...
Page 84 BarcoMed software driver installation Note: Note: Note: The system shown in figure 58 above is a dual-head, single Note: Note: BarcoMed 5MP2F Display Controller, no 3 party VGA card configuration, your system may look different. System manual Coronis 5MP...
Page 85 BarcoMed software driver installation System manual Coronis 5MP Page 56...
Page 86: Installing The Barcomed 5Mp2F Windows Xp Display Driver
Using the BarcoMed Product Installation Wizard To install your BarcoMed 5MP2F Windows Display Controller Driver, BARCO DPMS Screen Saver and CORONIS Rotation Service for the first time, follow the steps below. If you are reinstalling the drivers or installing a new driver release over an existing driver release, skip to the step 7 on the next page: 1.
Page 87 “Cancel” “Cancel” the wizard will exit. “Cancel” If you click “Inst “Inst “Install” “Inst all” all” all” the wizard will begin installing the “Inst all” selected software in the order listed on the Wizard’s Welcome Screen. System manual Coronis 5MP...
Page 88 “No” es” es”, the Wizard will exit and return you to the Barco Software Install Wizard. The wizard will then begin to install the next piece of software that was selected when you initially launched the Barco Software Install Wizard. If no additional pieces of software were “Finish”...
Page 89 Barco device driver on your BarcoMed Software CD (figure 65). If there are no Barco devices installed or if the driver on your BarcoMed Software CD does not support the installed devices, the dialog box will be empty, and program will exit and return to the BarcoMed Product Install Wizard when the user clicks “Finish”...
Page 90 DualView is a feature that is automatically supported by Windows XP. However, BARCO has provided a means for you to disable this functionality while running Windows XP. Figures 67 and 68 on the next page shows the difference between running without and with DualView enabled under Windows XP.
Page 91 Controller. If you wish to enable simply click “Next” “Next” “Next” to continue. If you do not wish to enable DualView “un-check” “un-check” “un-check” “un-check” the checkbox “un-check” next to “Enable the DualView device.”, and click “Next” “Next” “Next” “Next” to “Next” continue. System manual Coronis 5MP...
Page 92 Figure 70 14. Prior to beginning the installation the BarcoMed Driver Install Wizard will warn you that while the driver is being installed your display may flicker (figure 71). Click “OK” “OK” “OK” “OK” to continue. “OK” System manual Coronis 5MP...
Page 93 While the driver is being installed the screen shown in figure 72 will be visible. Figure 72 15. During the driver installation Windows XP will warn you that the driver has not passed Windows XP Logo Testing (see figure 73 on the next page). System manual Coronis 5MP...
Page 94 “Finish” to finish installing the display drivers and return to the “Finish” “Finish” “Finish” BarcoMed Product Install Wizard. Clicking “Cancel” “Cancel” “Cancel” will also “Cancel” “Cancel” return you to the BarcoMed Product Install Wizard, but will not delete the Barco Display Drivers. Figure 74 System manual Coronis 5MP...
Page 95: Barco Dpms Screen Saver Installation
After returning to the BarcoMed Product Install Wizard Welcome Screen, the wizard will automatically begin installing the next selected piece of BarcoMed Software. If you are working with the default selections, this will be the BARCO DPMS InstallShield Wizard, click “Cancel” “Cancel”...
Page 96 German names. Currently the default schemes are not supported in the Japanese, Korean and Chinese languages. We recommend that the users of these three languages install the English default schemes and then rename and save them into their language in System manual Coronis 5MP...
Page 97 “InstallShield Wizard Completed” page will appear (see figure 80 “Finish” “Finish” on the next page). Click “Finish” “Finish” “Finish” to exit the BARCO DPMS InstallShield Wizard and return to the BarcoMed Product Install Wizard Welcome Screen. System manual Coronis 5MP...
Page 98: Coronis Rotation Service Installation
“Next” on the Welcome Screen of the CORONIS Rotation “Next” “Next” Service InstallShield Wizard to continue the installation. Click “Cancel” to cancel the CORONIS Rotation Service installation and return to the BarcoMed Product Install Wizard (see figure 81 on the next page) System manual Coronis 5MP...
Page 99 Rotation Service InstallShield Wizard (figure 82). Click “Next” “Next” “Next” to “Next” “Next” continue the installation. Figure 82 24. Click “Next” “Next” “Next” on the “Setup has enough information” screen to “Next” “Next” continue (figure 83 on the next page) . System manual Coronis 5MP...
Page 100 BarcoMed Product Installation Wizard. Figure 84 Click “Finish” “Finish” “Finish” “Finish” to exit the BarcoMed Product Installation Wizard “Finish” (figure 85) or click “Back” “Back” “Back” if you wish to install additional “Back” “Back” BarcoMed software. System manual Coronis 5MP...
Page 101 Click “Yes” to restart your computer now. Click “No” if you wish to restart your computer later. Figure 86 When your system restarts, boot normally and log in using an account with administrator privileges and set the resolution of your CORONIS displays. System manual Coronis 5MP...
Page 102: Setting The Resolution Of Your Coronis Display Panel With Dualview Enabled
The resolution for each display connected to a single pecial note: BarcoMed controller must be identical, including the refresh rate. Repeat steps 1 – 7 to set the resolution for the displays on all the BarcoMed Display Controller(s) installed in your system. System manual Coronis 5MP...
Page 103: Setting The Resolution Of Your Coronis Display Panel With Dualview Disabled
To enable the device check the “Extend my Windows desktop into this monitor” checkbox checkbox checkbox checkbox. Do not checkbox click the “Apply” “Apply” “Apply” “Apply” button at this time. “Apply” 2. Click on the “Advanced” “Advanced” “Advanced” Button. “Advanced” “Advanced” System manual Coronis 5MP...
Page 104 Figure 88: Windows XP Display Properties Settings Tab for the 5MP2F with DualView disabled. Note: Note: Note: The system shown in figure 88 above is a dual-head, single Note: Note: BarcoMed 5MP2F display controller, no 3 party VGA card configuration. Your system may look different. System manual Coronis 5MP...
Page 105: Disabling Dualview Under Windows Xp
“OK”, twice. Your system “OK” will automatically shutdown and restart. Figure 89: BarcoMed Driver Tab – Disabling DualView 4. When your machine comes back up, you will need to re-set up your CORONIS displays with the desired display settings. System manual Coronis 5MP...
Page 106: Re-Enabling Dualview Under Windows Xp
“OK”, twice. Your system will automatically shutdown and restart. Figure 90: BarcoMed Driver Tab – Enabling DualView 4. When your machine comes back up, you will need to re-set up your CORONIS displays with the desired display settings. System manual Coronis 5MP...
Page 107 BarcoMed software driver installation (This page intentionally left blank.) System manual Coronis 5MP...
Page 108: Barcomed Driver Tab
Under Windows XP, click on “Settings” tab. Double click on the rectangle that represents the BarcoMed Display Controller to bring up its property page. Click on the “BarcoMed Driver” tab (see figure 93, on the next page). Figure 91: BarcoMed Driver Tab under Windows NT 4.0 System manual Coronis 5MP...
Page 109 BarcoMed software driver installation Figure 92: BarcoMed Driver Tab under Windows 2000 Figure 93: BarcoMed Driver Tab under Windows XP System manual Coronis 5MP...
Page 110: Status
As shown in the next picture, the 20 standard system colors are converted from RGB to gray values. The rest of the 236 entries from System manual Coronis 5MP...
Page 111: Static Gray Palette With No System Colors
The Enable Dithering check box will be grayed-out, and dithering will be automatically disabled regardless of whether this check box is checked. This complies with the Windows standard interface method. If you are unsure whether or not System manual Coronis 5MP...
Page 112: Drawing Modes
For example, if the current display controller installation is capable of driving four heads, but you only have three monitors which are placed in a single row, then you can select the System manual Coronis 5MP...
Page 113: Languages Supported
If “Custom Configuration” is displayed, it means that the current monitor configuration was set via the registry and it doesn’t agree with any of the configurations that the display control panel supports. Contact Barco Medical Imaging Systems for further information. Languages supported Languages supported...
Page 114: Barcomed Hardware Tab
I f n I f n I f n I f n I f n I f n I f n I f n I f n I f n I f n I System manual Coronis 5MP...
Page 115 Double click on the rectangle that represents the BarcoMed Display Controller to bring up its property page. Click on the “BarcoMed Hardware Tab” (see figure 95, on the next page). Figure 94: BarcoMed Hardware Tab under Windows NT 4.0 System manual Coronis 5MP...
Page 116: Using The Barcomed Hardware Tab
Displays the current BarcoMed Display Controller, driver, and the currently selected display resolution. Identify Device: Identify Device: Identify Device: Identify Device: Identify Device: This button is for BarcoView Medical Imaging Systems (MIS) internal use only and is grayed out. System manual Coronis 5MP...
Page 117: Pci Information
The other report that is generated contains information about the Barco display adapters installed in the system and will be named BarcoMedDeviceInfo.txt.
Page 118 BarcoView MIS if and when a firmware update is required. S S S S S pecial Note: pecial Note: pecial Note: pecial Note: pecial Note: The BarcoMed Hardware Configuration Wizard is applicable only for AURA-based Display Controller(s). System manual Coronis 5MP...
Page 119 BarcoMed software driver installation (This page intentionally left blank.) System manual Coronis 5MP...
Page 120: Barco Display Tab
1. Open the “Display Properties Control Panel” by right clicking on the desktop, then select “Properties”. 2. Under Windows NT 4.0, Click on the “BARCO Display Tab” (see figure 96, below). Figure 96: BARCO Display Tab under Windows NT 4.0 Under Windows 2000 and Windows XP, click on the “Settings”...
Page 121: Using The Barco Display Tab
BarcoMed software driver installation Display you are working with to bring up its properties page. Click on the “BARCO Display” tab (figure 97). Figure 97: BARCO Display Tab under Windows 2000 and Windows XP Using Using The BARCO Display Using...
Page 122: Properties
Current Luminance Value: alue: alue: alue: alue: This is the current luminance value of the display. It may vary a bit from time to time, for the display continuously calibrates itself to meet the target luminance value. System manual Coronis 5MP...
Page 123 BarcoMed software driver installation Figure 98 System manual Coronis 5MP...
Page 124: Barco Dpms Screen Saver Overview
DPMS states as requested by the display controller. The default state for the BARCO DPMS Screen Saver is the Off state. In addition to simply entering the Off state after the work day, the user can specify that the display first go through two other DPMS Screen Saver states before going into Off state.
Page 125: Barco Dpms Screen Saver Options
BARCO DPMS Screen Saver Options BARCO DPMS Screen Saver Options BARCO DPMS Screen Saver Options From the “BARCO DPMS Screen Saver Control Panel” you can change many DPMS screen saver elements simultaneously. The DPMS screen saver elements in each scheme are work schedule, work day screen saver, DPMS settings after work day, and many additional options.
Page 126: Screen Saver During Work Day
Screen Saver During Work Day Screen Saver During Work Day On CRT based displays, such as the Barco MGD series, a “regular” screen saver can be invoked during user inactivity during the work day. This “regular” screen saver and its settings can be chosen from the “Screen Saver During Work Day”...
Page 127: Monitor Settings
If you have a Barco Medical Display, select “Barco Quick Start.” If a non-Barco display is being used, select the amount of time it takes your display to warm up via the “Monitor Setting”...
Page 128: Using The Barco Dpms Screen Saver
Barco DPMS Screen Saver so that Windows will store the selection in the user’s profile. If a user does not select the BARCO DPMS Screen Saver as his screen saver, the next time he logs on to the system the screen saver selection may be blank.
Page 129 BarcoMed software driver installation Figure 99: Windows NT 4.0 Screen Saver Tab System manual Coronis 5MP...
Page 130 BarcoMed software driver installation Figure 100: Windows 2000 Screen Saver Tab Figure 101: Windows XP Screen Saver Tab System manual Coronis 5MP...
Page 131 BarcoMed software driver installation 3. Click on the “Settings” “Settings” “Settings” “Settings” button. The “BARCO DPMS Screen Saver “Settings” Control Panel” will open (see figure 102). Figure 102: BARCO DPMS Settings Control Panel 4. Use the default schemes by selecting one of the three default schemes.
Page 132 If “Barco Quick S art” you are using a non-Barco display, select the amount of time it takes your display to warm up via the “Monitor Setting” section. Contact your display vendor for this warm-up time. On Barco CORONIS displays, the I-GUARD will stabilize the image within a...
Page 133: Installing Or Reinstalling Barco Dpms
Inst alling or Reinst alling BARCO DPMS To install or reinstall the BARCO DPMS Screen Saver insert the CORONIS Software CD in the appropriate device on your computer and run the BarcoMed Product Install Wizard (please see the section Software Installation for complete instructions).
Page 134 “Remove” on the Remove Program Screen of the Wizard (figure 106). Figure 106 5. When the Wizard has finished removing the program, click “Finish” “Finish” on the InstallShield Wizard Completed Screen of the “Finish” “Finish” “Finish” Wizard (figure 107). System manual Coronis 5MP...
Page 135 BarcoMed software driver installation Figure 107 “Quit” “Quit” 6. Click “Quit” “Quit” “Quit” to exit the BarcoMed Product Installation Wizard. System manual Coronis 5MP...
Page 136 MEDICAL MEDICAL SOFTW SOFTW MEDICAL SOFTW SOFTW ARE MEDICAL MEDICAL SOFTW INST INST ALLA ALLA TION TION INST ALLA ALLA TION TION AND INST INST ALLA TION USAGE USAGE USAGE USAGE USAGE System manual Coronis 5MP...
Page 137: Medical Software Installation And Usage
MediCal software installation and usage (This page intentionally left blank.) System manual Coronis 5MP...
Page 138: Medical Software Installation
5 For all the displays in the system, define (if necessary) and select a Preset. 6 After selecting the Preset, MediCal starts consistency calibration automatically. 7 Define the Q/A task schedule. 8 Run the due tasks. Please refer to the MediCal User Guide for more information. System manual Coronis 5MP...
Page 139 MediCal software installation and usage (This page intentionally left blank.) System manual Coronis 5MP...

Barco Coronis 5MP System Manual

Quick Links

Need help?

Questions and answers

Related Manuals for Barco Coronis 5MP

Summary of Contents for Barco Coronis 5MP

Table of Contents