Barco Coronis 5MP System Manual page 132

Hide thumbs Also See for Coronis 5MP:
Table of Contents

Advertisement

To create a new scheme by modifying one of the three default
schemes please do the following.
1. Open the "Display Properties Control Panel" by right clicking on an
empty space of the desktop and selecting "Properties" from the
drop down menu; then select the "Screen Saver"
2. Select the "BARCO DPMS Screen Saver"
drop down menu if it is not already selected.
3. Click on the "Settings"
Control Panel" will open.
4. Select one of the default schemes from the "Current Scheme"
drop down menu.
5. Set the Work Schedule by setting the beginning and ending time of
your work day for each day of the week.
6. Select the screen saver you wish to use during the work day in the
"Screen Saver During Work Day" section.
7. Select the amount of time you wish to spend in the Stand-By and
Suspend states after the work day has ended. Please note that
after the time specified has elapsed when you are in Stand-By or
Suspend, you will automatically go into the Off state.
8. Select the amount of time it takes for your display to warm up. If
you have a Barco Medical Display, select "Barco Quick S
you are using a non-Barco display, select the amount of time it
takes your display to warm up via the "Monitor Setting" section.
Contact your display vendor for this warm-up time. On Barco
CORONIS displays, the I-GUARD will stabilize the image within a
few seconds after the display returns to the active state, thus
eliminating the need for a warm-up period at the beginning of the
work day.
9. If you wish to use this DPMS screen saver as the screen saver at
logon time, check the "Use
"Additional Options" section.
System manual Coronis 5MP
Figure 103
"BARCO DPMS Screen Saver" in the "Screen Saver"
"BARCO DPMS Screen Saver"
"BARCO DPMS Screen Saver"
"BARCO DPMS Screen Saver"
"Settings"
"Settings"
"Settings" button. The "BARCO DPMS Screen Saver
"Settings"
"Use
"Use As Logon Screen Saver"
"Use
"Use
BarcoMed software driver installation
"Screen Saver" tab.
"Screen Saver"
"Screen Saver"
"Screen Saver"
"Barco Quick St t t t t art"
"Barco Quick S
"Barco Quick S
"Barco Quick S
As Logon Screen Saver"
As Logon Screen Saver" box in the
As Logon Screen Saver"
As Logon Screen Saver"
art"
art". If
art"
art"
133

Advertisement

Table of Contents
loading

Table of Contents