13. For each display supported by your BarcoMed Display
Controller(s) the Wizard will display the screen shown in figure 43.
Click "Y "Y "Y "Y "Yes"
14. If the Wizard has successfully installed the drivers for all of the
displays supported by your BarcoMed Display Controllers Display
Controller(s), the Wizard will advise you that the installation is
complete and prompt you to click "Finish"
next page). Click "Finish"
and return to the BarcoMed Product Install Wizard. Clicking
"Cancel" will also return you to the BarcoMed Product Install
"Cancel"
"Cancel"
"Cancel"
"Cancel"
Wizard, but will not delete the Barco Display Drivers.
System manual Coronis 5MP
Figure 42
es"
es"
es"
es" to continue.
Figure 43
"Finish" to finish installing the display drivers
"Finish"
"Finish"
"Finish"
BarcoMed software driver installation
"Finish"
"Finish"
"Finish"
"Finish" (see figure 44 on the
72