1. Manuals
  2. Brands
  3. Barco Manuals
  4. Monitor
  5. Coronis 5MP Mammo
  6. User manual

Barco Coronis 5MP User Manual

Hide thumbs Also See for Coronis 5MP:
Table of Contents

Advertisement

Quick Links

Download this manual See also: System Manual, Installer and User Manual
Coronis 5MP
User Guide

Advertisement

Table of Contents
loading

Related Manuals for Barco Coronis 5MP

Summary of Contents for Barco Coronis 5MP

  • Page 1 Coronis 5MP User Guide...
  • Page 2 Coronis 5MP...

  • Page 3: Welcome

    Welcome! The high-grade Coronis 5MP display system offers unsurpassed film-like images with ultra-high resolution, luminance and contrast . The 21.3” LCD provides unequaled image quality without pixelization, a wide viewing angle and perfect geometry. Building on proven technology, Coronis 5MP provides ultimate precision and performance while maintaining the highest brightness and contrast.
  • Page 4 Coronis 5MP...

  • Page 5: Table Of Contents

    Navigating through the OSD menus........... 32 Advanced operation ............33 OSD menu position................33 OSD menu language ................33 OSD menu automatic close function ..........34 Power status indicator light..............34 Key indicator lights ................35 Power lock function................35 Coronis 5MP...
  • Page 6 Front glass ..................... 52 Cabinet....................53 Important information ..........54 Safety information................54 Environmental information..............57 Regulatory compliance information............ 60 EMC notice..................... 61 Explanation of symbols ................ 67 Legal disclaimer ..................68 Technical specifications ................ 70 Open source license information ............73 Coronis 5MP...

  • Page 7: What's In The Box

    • If you ordered a Barco display controller, it’s also in the box together with its accessories. A dedicated user guide is available on the system Keep your original packaging. It is designed for this display and is the ideal protection during transport.

  • Page 8: Parts, Controls And Connectors

    Parts, controls and connectors Front view 4 5 6 Figure 1: Front view Left key Right key Menu key Power on/off key Ambient light sensor Power LEDs Side downstream USB 2 & 3 Coronis 5MP...

  • Page 9: Rear View

    Rear view ONNECTOR COMPARTMENT COVER CLOSED Figure 2: Rear view cover closed Connector compartment Display release button for cover portrait position Mounting anchor Display release button for landscape position Coronis 5MP...
  • Page 10 +5 VDC, 0.5 A power output Display Port video input DVI video input Ethernet connection (see USB upstream note below) USB downstream 1 The Ethernet connection is used for maintenance purposes and is not supported for user application. Coronis 5MP...

  • Page 11: Single Foot

    Single foot Figure 4: Tilt and swivel foot Tilt & Swivel neck cover Cable duct covers Coronis 5MP...

  • Page 12: Dual Foot

    Dual foot Figure 5: Dual tilt and swivel foot Cable cover Left & right arm cover Foot lock clip (behind cable Display positioning sliders cover) Coronis 5MP...

  • Page 13: Display Installation

    Display and connecting all ARCO ORONIS necessary cables, make sure to have a suitable display controller physically installed in your computer. If you are using a Barco display controller, please consult the user guide delivered with it to do this. Mounting the display &...
  • Page 14 Push the bottom of the panel firmly towards the stand so that the bottom anchors clip in the bottom gaps (2). Check that the panel is firmly attached to the stand. Tilt and swivel the panel to the desired position and angle. Figure 7: Adjust panel position Coronis 5MP...
  • Page 15 Do not change the display orienatation by turning the panel when it is mounted on its stand. To change from landscape to portrait or the other way around, remove the panel from its stand and use the appropriate mounting hooks as described above. Coronis 5MP...
  • Page 16 Verify that mounting clamp and mounting anchor are perfectly fitting and that the display is firmly mounted. Repeat steps 2 to 5 for the second display. Limit transportation distances of the mounted displays and foot system. Pull out the foot lock clip. Coronis 5MP...
  • Page 17 Figure 10: Adjust display position When both displays are not correctly aligned, minor corrections are possible in relative height and relative angle, by loosening and tightening the opposite pairs of allen screws (opposite sides or opposite diagonals) of the positioning sliders. Coronis 5MP...
  • Page 18 Instead, make sure that the arm is equipped WARNING with a VESA approved handle and use this to move the display. Please refer to the instruction manual of the arm for more information and instructions. Coronis 5MP...

  • Page 19: Removing The Covers

    To remove the connector compartment cover, proceed as follows: Gently push the two lips on top of the cover. Pull the top of the cover slightly away from the display and lift the cover upwards. Figure 12: Remove connector compartment cover Coronis 5MP...
  • Page 20 Remove the tilt & swivel neck cover (1). Therefore, first tilt the display panel in upright position. Then lift and pull backward the neck cover. Also to facilitate cable routing afterwards, open both cable duct covers (2). Figure 13: Remove cable covers Coronis 5MP...
  • Page 21 Gently press and hold the lock clips at the inside of the top of the cover. Slide the cover upwards on the shaft while holding the clips pressed. It may be needed to tilt the displays if the arm is blocking the movement of the cover. Figure 14: Remove cable cover Coronis 5MP...

  • Page 22: Connecting The Display

    Only connect one of the two video links. Connecting both inputs simultaneously will result in driver errors. Connect the DVI or DP of the display controller to the DVI or DP connector of the display. Figure 15: DVI connection Figure 16: DP connection Coronis 5MP...
  • Page 23 Connect the supplied external DC power supply to the +24 VDC power input of the display. Figure 18: Power connection Plug the mains connector of the external DC power supply to a grounded power outlet by means of the supplied power cable. Coronis 5MP...

  • Page 24: Routing The Cables

    Route the cables alongside the neck and in the cable ducts in the tilt & swivel foot. See figure 19 above. Re-attach the connector compartment cover and neck cover. Close the cable duct covers. Push the cable duct covers upward to lock them. Coronis 5MP...
  • Page 25 If the display is mounted on the system dual tilt & swivel foot, cables are best routed behind the arms and through the cable channel in the foot shaft, as shown in the pictures below. Figure 20: Cable routing Coronis 5MP...

  • Page 26: First Time Starting Up

    ORONIS mode at a default refresh rate when first time starting up. If you are using a Barco display controller, please consult the user guide delivered with it to install the drivers, software and documentation. When this is done, your display will automatically detect the connected video input signal(s) and apply the correct video mode and refresh rate.

  • Page 27: Daily Operation

    DPMS is enabled on your display, but it also needs to be activated on your workstation. To do this, go to “Power Options Properties” in the “Control Panel”. Barco recommends setting DPMS activation after 20 minutes of non-usage. SE A SCREEN SAVER TO AVOID IMAGE RETENTION Prolonged operation of an LCD with the same content on the same screen area may result in a form of image retention.
  • Page 28 NHANCE USER COMFORT Every Barco multi-head display system is color matched with the highest specification in the market. Barco recommends keeping color-matched displays together. Furthermore, it is important to use all displays of a multi-head configuration at the same rate to preserve color matching throughout the economic lifetime of the system.

  • Page 29: Key Indicator Lights

    "|" position. Switching on the display while it is in stand-by mode or vice versa can both be done by: Illuminate the keys as previously described. While the keys are illuminated, touch the key for approximately 2 seconds. Coronis 5MP...
  • Page 30 In case of a power outage recovery, your display will always start-up in the power mode it was in before the power interruption (i.e. stand-by or on). This protects your display against inadvertent image retention problems. Coronis 5MP...

  • Page 31: Bringing Up The Osd Menus

    34 for detailed instructions on how to do this. The OSD menu position can be modified in the OSD menu. Please refer to “OSD menu position” on page 33 for detailed instructions on how to do this. Coronis 5MP...

  • Page 32: Navigating Through The Osd Menus

    To go into a submenu or confirm adjustments and selections, use • key. Use the key to cancel adjustments or exit a (sub)menu. • Exit all OSD menus at once by touching the key for • approximately 2 seconds. Coronis 5MP...

  • Page 33: Advanced Operation

    ARCO Display. ORONIS O CHANGE THE LANGUAGE OF THE MENU Bring up the OSD main menu. Navigate to the Configuration > User Interface > Menu menu. Enter the Language submenu. Select one of the available languages and confirm. Coronis 5MP...

  • Page 34: Osd Menu Automatic Close Function

    O ENABLE DISABLE THE POWER STATUS INDICATOR LIGHT Bring up the OSD main menu. Navigate to the Configuration > User Interface > Indicator Lights menu. Enter the Power Status submenu. Select Enabled/Disabled as desired and confirm. Coronis 5MP...

  • Page 35: Key Indicator Lights

    O ENABLE DISABLE THE POWER LOCK FUNCTION Bring up the OSD main menu. Navigate to the Configuration > User Interface > Controls menu. Enter the Power Lock submenu. Select Enabled/Disabled as desired and confirm. Coronis 5MP...

  • Page 36: Keys Sound

    Display processor to communicate directly over USB with the connected Enabling the USB endpoint is only recommended when you are using a non-Barco display controller. If you are using a Barco display controller, this communication will automatically be done over the connected video cable(s).

  • Page 37: Ddc Hid Device

    USB upstream connector is required to be able to use this functionality. Enabling the USB endpoint is only recommended when you are using a non-Barco display controller. If you are using a Barco display controller, this communication will automatically be done over the connected video cable(s).

  • Page 38: Dpms Mode

    To do this, go to the “Power options properties” window of your workstation. Barco recommends setting DPMS activation after 20 minutes of non-usage. When DPMS mode is enabled on your display, an additional OSD power saving function becomes available: hibernate.

  • Page 39: Hibernate

    Select Enabled/Disabled as desired and confirm. O SPECIFY THE HIBERNATE TIMEOUT Bring up the OSD main menu. Navigate to the Configuration > Power Management menu. Enter the Hibernate Timeout submenu. Set the timeout value as desired and confirm. Coronis 5MP...

  • Page 40: Luminance Target

    O SET THE LUMINANCE TARGET Bring up the OSD main menu. Navigate to the Configuration > Calibration menu. Enter the Luminance Target submenu. Set a luminance target value as desired and confirm. Coronis 5MP...

  • Page 41: Viewing Modes

    O SELECT A VIEWING MODE Bring up the OSD main menu. Navigate to the Configuration > Calibration menu. Enter the Viewing Mode submenu. Select Diagnostic/Text as desired and confirm. Coronis 5MP...

  • Page 42: Display Functions

    In short, the DICOM display function results in more visible grayscales in the images. Barco recommends selecting the DICOM display function for most medical viewing applications. User This display function will be automatically selected when display functions are defined by MediCal QAWeb.

  • Page 43: Ambient Light Compensation (Alc)

    “Reading rooms” on page 44. ALC: O ENABLE DISABLE Bring up the OSD main menu. Navigate to the Configuration > Calibration > Ambient Light menu. Enter the Ambient Light Compensation submenu. Select Enabled/Disabled as desired and confirm. Coronis 5MP...

  • Page 44: Reading Rooms

    Corresponds to light conditions in diagnostic reading rooms for computed tomography, magnetic resonance or nuclear medicine scans. Staff Office Corresponds to light conditions in office rooms. Clinical Viewing Corresponds to light conditions in Room diagnostic reading rooms for clinical viewing. Coronis 5MP...

  • Page 45: Continuous Alc

    O SELECT CONTINUOUS ALC Bring up the OSD main menu. Navigate to the Configuration > Calibration > Ambient Light menu. Enter the Continuous ALC submenu. Select Enabled/Disabled as desired and confirm. Coronis 5MP...

  • Page 46: Image Scaling

    The OSD menu however, allows to overrule this behavior and force the image orientation to portrait or landscape regardless of the physical orientation of the display. This may be especially useful when operating your display with the screen facing upwards. Coronis 5MP...

  • Page 47: Video Input Signals

    The input is automatically selected. O MANUALLY SELECT A VIDEO INPUT SIGNAL Bring up the OSD main menu. Navigate to the Configuration > Image Source menu. Enter the Input Signal submenu. Select one of the available input signals and confirm. Coronis 5MP...

  • Page 48: Video Encoding Modes

    (which is not always possible with HDR1). This mode is usually used on color displays. Dual 10 Dual 10 is a Barco specific 10-bit video encoding mode which is usually used on grayscale displays and which allows full refresh rate.

  • Page 49: Grayscale Conversion Modes

    This mode is intended for grayscale displays where gray is sent over the red, green and blue channel. This done by means of a standard conversion mechanism where 30% red, 59% green and 11% blue are used to generate gray. Coronis 5MP...

  • Page 50: Edid Timings

    O MANUALLY SET TIMINGS Bring up the OSD main menu. Navigate to the Configuration > Image Source menu. Enter the Timings submenu. Select Refresh Rate, Preferred Orientation or Color Depth. Select one of the available settings and confirm. Coronis 5MP...

  • Page 51: Display Info

    (display function, luminance, ALC, etc.) and the status about activated connections. O RETRIEVE THE STATUS OF YOUR DISPLAY Bring up the OSD main menu. Navigate to the Status menu. Enter the Display, Image Sources, Calibration or Connectivity submenu as desired. Coronis 5MP...

  • Page 52: Cleaning Your Display

    Do not apply or spray liquid directly to the front glass as excess liquid may cause damage to internal electronics. Instead, apply the liquid to the cleaning cloth. Coronis 5MP...

  • Page 53: Cabinet

    Do not apply or spray liquid directly to the cabinet as excess liquid may cause damage to internal electronics. Instead, apply the liquid to the cleaning cloth. Repeat with water only. Wipe dry with a dry cloth. Coronis 5MP...

  • Page 54: Important Information

    Equipment not suitable for use in the presence of a flammable anesthetic mixture with air or with oxygen or nitrous oxide. PATIENT CARE EQUIPMENT Equipment primarily for use in a health care facility that is intended for use where contact with a patient is unlikely. Coronis 5MP...
  • Page 55 Never use the display near water - e.g. near a bathtub, washbasin, swimming pool, kitchen sink, laundry tub or in a wet basement. ENTILATION Do not cover or block the ventilation openings in the cover of the set. When installing the display in a cupboard or another closed location, Coronis 5MP...
  • Page 56 GB17625.1-2003, KC, VCC, FCC class B, ICES-001 Level B, FDA 510K, RoHS . 1.7.2: ATIONAL CANDINAVIAN EVIATIONS FOR Finland: "Laite on liitettävä suojamaadoituskoskettimilla varustettuun pistorasiaan" Norway: "Apparatet må tilkoples jordet stikkontakt" Sweden: "Apparaten skall anslutas till jordat uttag" Coronis 5MP...

  • Page 57: Environmental Information

    ERCURY NOTICE This Barco product consists of materials that may contain mercury, which must be recycled or disposed of in accordance with local, state, or country laws: Within this system, the backlight lamps in the monitor display •...
  • Page 58 Electronic Information Products" (Also called RoHS of Chinese Mainland), the table below lists the names and contents of toxic and/or hazardous substances that Barco's product may contain. The RoHS of Chinese Mainland is included in the MCV standard of the Ministry of Information Industry of China, in the section "Limit Requirements of toxic substances...
  • Page 59 Pollution Control Labeling Standard" of Chinese Mainland, marked with the Environmental Friendly Use Period (EFUP) logo. The number inside the EFUP logo that Barco uses (please refer to the photo) is based on the "Standard of Electronic Information Products Environmental Friendly Use Period"...

  • Page 60: Regulatory Compliance Information

    Consult the dealer or an experienced radio/TV technician for help. • ANADIAN NOTICE This ISM device complies with Canadian ICES-001. Cet appareil ISM est conforme à la norme NMB-001 du Canada. Coronis 5MP...

  • Page 61: Emc Notice

    Display complies with appropriate medical EMC ARCO ORONIS standards on emissions to, and interference from surrounding equipment. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must Coronis 5MP...
  • Page 62 Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from • that to which the receiver is connected. Consult the dealer or an experienced technician for help • Coronis 5MP...
  • Page 63 (>95% powered from an < 5% U (>95% dip in U ) for 5s uninterruptible power dip in U ) for 5s supply or a battery. is the a.c. mains voltage prior to application of the test level Coronis 5MP...
  • Page 64 To assess the electromagnetic environment due to fixed RF transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the B ARCO ORONIS Coronis 5MP...
  • Page 65 Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 3 V/m. At 80 MHz and 800 MHz, the higher frequency range applies. These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects and people. Coronis 5MP...
  • Page 66 (W) according to the transmitter manufacturer. At 80MHz and 8000MHz, the separation distance for the higher frequency range applies. These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection form structures, object and people. Coronis 5MP...

  • Page 67: Explanation Of Symbols

    CCC regulations Indicates the display is approved according to the VCCI regulations Indicates the USB connectors on the display Indicates the manufacturing date Indicates the temperature limitations for the display to operate within specs Indicates the display serial no. Coronis 5MP...

  • Page 68: Legal Disclaimer

    Barco software products are the property of Barco. They are distributed under copyright by Barco N.V. or Barco, Inc., for use only under the specific terms of a software license agreement between Barco N.V. or Barco Inc.
  • Page 69 - without written permission of Barco. © 2013 Barco N.V. All rights reserved. ATENT INFORMATION This product is covered under the following intellectual property rights: US Patent RE43,707 US Patent 7,038,186 US Patent 7,166,829 US Patent 6,950,098 European Patent 1 274 066.

  • Page 70: Technical Specifications

    500 cd/m² luminance (ULT off)* Contrast ratio (typical)* 850:1 typical Response time (Tr + Tf) 36 ms typical Scanning frequency (H; V) 30-150 kHz; 15-80 Hz Housing color Gray Video input signals DVI-D Dual Link / DisplayPort (per display) Coronis 5MP...
  • Page 71 Net weight packaged with NA kg stand Net weight packaged w/o 14.6 kg stand Height adjustment range 100 mm Tilt -5° / +25° Swivel -45° / +45° Left/Right Pivot Mounting standard VESA (100 mm) Screen protection Protective, non-reflective glass cover Coronis 5MP...
  • Page 72 0°C to 40°C, 15°C to 35°C within specs Storage Temperature -20°C to 60°C Operating Humidity 8% - 70% (non-condensing) Storage Humidity 5% - 95% (non-condensing) Operating Altitude 3000 m Storage Altitude 7500 m * In dark reading room conditions (0 lux) Coronis 5MP...

  • Page 73: Open Source License Information

    This product contains software components released under an Open Source license. A copy of the source code is available on request by contacting your MID customer support representative at image.careGLOB@barco.com. The licenses are only provided in English because translations do not legally state the distribution terms for software that uses these licenses - only the original English text does that.
  • Page 74 (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to Coronis 5MP...
  • Page 75 NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS Coronis 5MP...
  • Page 76 (except to the extent that warranties are provided), that licensees may convey the work under this License, and how to view a copy of this License. If the interface presents a list of user commands or options, such as a menu, a prominent item in the list meets this criterion. Coronis 5MP...
  • Page 77 This License will therefore apply, along with any applicable section 7 additional terms, to the whole of the work, and all its parts, regardless of how they are packaged. This License gives no permission to license the Coronis 5MP...
  • Page 78 Corresponding Source conveyed, and Installation Information provided, in accord with this section must be in a format that is publicly documented (and with an implementation available to the public in source code form), and must require no special password or key for unpacking, reading or copying. Additional Terms. Coronis 5MP...
  • Page 79 Corresponding Source of the work from the predecessor in interest, if the predecessor has it or can get it with reasonable efforts. Coronis 5MP...
  • Page 80 GNU General Public License "or any later version" applies to it, you have the option of following the terms and conditions either of that numbered version or of any later version published by the Free Software Foundation. If the Program does Coronis 5MP...
  • Page 81 Coronis 5MP...
  • Page 82 You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change. c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this Coronis 5MP...
  • Page 83 License. Also, you must do one of these things: a) Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the Coronis 5MP...
  • Page 84 This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. Coronis 5MP...
  • Page 85 If you modify a copy of the Library, and, in your modifications, a facility refers to a function or data to be supplied by an Application that uses the facility (other than as an argument passed when the facility is invoked), then you may convey a copy of the modified version: Coronis 5MP...
  • Page 86 If the Library as you received it specifies that a proxy can decide whether future versions of the GNU Lesser General Public License shall apply, that proxy's public statement of acceptance of any version is permanent authorization for you to choose that version for the Library. Coronis 5MP...
  • Page 87 Coronis 5MP...
  • Page 88 B4100592-02 January 2013 Barco n.v. President Kennedypark 35 8500 Kortrijk Belgium 0120 www.barco.com...

Table of Contents