Precautions; Before Installing The Display - Barco Coronis 5MP System Manual

INST INST ALLA ALLA
INST INST ALLA INST ALLA ALLA TION

Precautions

Precautions Precautions
Precautions Precautions
• Keep your original packaging. It is designed for this display and is
the ideal protection during transport.
• Avoid reflections in the flat panel to reduce eye strain.
• Place the display on a strong and stable table or desk.
• Keep the display away from heat sources and provide enough
ventilation in case it is built in a rack or console.
• Make sure all equipment is switched off before connecting the
signals.
Before inst Before inst
Before inst Before inst Before inst alling the display
Important: Import Import
Import Import
In the factory, the height-positioning system in the display foot is
blocked with a strap to prevent damage during transportation.
Before installing the display, you must remove this strap.
T T T T T o remove the strap: o remove the strap: o remove the strap: o remove the strap:
o remove the strap:
1 Position the display with its rear side facing you.
2 If the foot cover is mounted on the foot, lift up the 2 clips of the foot
cover to release the cover from the foot.
3 Pull the lower side of the cover towards you and simultaneously
slide the cover downward.
4 Pull the red strap out of the fixation holes in the foot.
You can better leave the cover off the foot while connecting the signal
cables to the display.
System manual Coronis 5MP
TION TION
TION TION
alling the display alling the display
alling the display alling the display
ant: ant: ant:
ant:
Display installation
27