Barco Coronis 5MP System Manual page 64

The BarcoMed Product Installation Wizard may prompt you to
restart your system. If it does, you must restart your system in
order for the updated version of the Microsoft Installer to be
effective and to be able to install the software on your BarcoMed
Software CD (figure 31). Click "Y "Y "Y "Y "Yes"
When your system restarts log in using an account with
administrator privileges. When your system restarts Windows
2000 will again automatically launch the "Found New Hardware
Wizard". Click "Cancel"
Wizard". Continue to click "Cancel"
launching the "Found New Hardware Wizard - Video Controller".
6. The BarcoMed Product Installation Wizard's welcome screen will
now be displayed. By default all the software on the BarcoMed
Software CD will be selected (figure 32). For the initial installation
we recommend that you install all of the software. If you do not
want to install a particular BarcoMed Software product, deselect it
by clearing the checkbox next to it.
When you have selected the BarcoMed Software you wish to
install click "Inst
or "Cancel"
System manual Coronis 5MP
"Cancel" "Cancel"
"Cancel" to exit the "Found New Hardware "Cancel"
"Inst "Inst all" all"
"Inst "Install" all" on the Wizard's Welcome Screen to continue all"
"Cancel" "Cancel" to exit the wizard. "Cancel"
"Cancel"
"Cancel" "Cancel"
If you click "Cancel" "Cancel" the wizard will exit. "Cancel"
BarcoMed software driver installation
Figure 30
es" es"
es" es" to restart your system.
Figure 31
"Cancel" "Cancel"
"Cancel" "Cancel" until Windows 2000 stops
65