Barco Coronis 5MP System Manual page 87

6. Windows XP may also tell you that it has finished installing new
devices and may ask you if you want to restart your computer.
Click "No"
7. Insert your BarcoMed Software CD into your computer's CD drive.
The "BarcoMed Product Installation Wizard" should start
automatically. If it doesn't start within 5 minutes, browse the
contents of your BarcoMed Software CD and double click on the
file: "Setup.exe"
8. The BarcoMed Product Installation Wizard's Welcome Screen will
be displayed. By default all the software on the BarcoMed
Software CD will be selected (figure 62 on the next page). For the
initial installation we recommend that you install all of the software.
If you do not want to install a particular BarcoMed Software
product, deselect it by clearing the checkbox next to it.
When you have selected the BarcoMed Software you wish to
install, click "Inst
or "Cancel"
System manual Coronis 5MP
Figure 61: Found New Hardware Wizard
"No" "No"
"No" "No".
"Setup.exe" to start the wizard. "Setup.exe" "Setup.exe"
"Setup.exe"
"Inst "Inst "Install" all" all" on the Wizard's Welcome Screen to continue all"
"Inst all"
"Cancel" "Cancel" to exit the wizard. "Cancel"
"Cancel"
If you click "Cancel" "Cancel" the wizard will exit. "Cancel" "Cancel"
"Cancel"
If you click "Inst "Install" "Inst "Inst
"Inst
selected software in the order listed on the Wizard's
Welcome Screen.
BarcoMed software driver installation
all" all" the wizard will begin installing the all"
all"
88