Barco Dpms Screen Saver; Introduction; Barco Dpms Screen Saver Options - Barco Color Coronis 2MP Installation & User Manual

Barco DPMS Screen Saver

Barco DPMS Screen Saver

Introduction

The Barco DPMS (Display Power Management Signaling) Screen
Saver allows the user to set power and display saving features
for medical displays controlled by BarcoMed display controllers.
At the end of the work day, the display will enter certain DPMS
states as requested by the display controller.
Note: The Barco DPMS Screen Saver will not control any displays
connected to a non-Barco display controller.
The default state for the Barco DPMS Screen Saver is the Off state.
In addition to simply entering the Off state after the work day,
the user can specify that the display first go through two other
DPMS Screen Saver states before going into Off state. These two
other states for the Screen Saver are Stand-By and Suspend. The
user can specify how much time should be spent in each state in
the "Amount of Time in each DPMS Power State" section.
On Liquid Crystal Display (LCD) based displays, such as the Barco
C displays, it is not necessary to invoke a screen saver as
ORONIS
there is no CRT phosphor to preserve. However, one can extend
the life of the backlight in the LCD display, in addition to realizing
great power savings, during period of user inactivity by using
DPMS to quickly enter the Off state. We recommend setting the
work day to be as short as possible to get the maximum power
savings on C
The Barco DPMS Screen Saver can also be used when no one is
logged on.

Barco DPMS Screen Saver Options

From the "Barco DPMS Screen Saver Control Panel" you can
change many DPMS screen saver elements simultaneously. The
DPMS screen saver elements in each scheme are work schedule,
work day screen saver, DPMS settings after work day, and many
additional options.
Color Coronis 2MP
displays.
ORONIS
91