Barco Coronis 5MP System Manual page 47

The BarcoMed Product Installation Wizard will advise you when it
has successfully installed the new version of the Microsoft Installer
(figure 6).. Click "OK"
The BarcoMed Product Installation Wizard may prompt you to
restart your system. If it does, you must restart your system in
order for the updated version of the Microsoft Installer to be
effective and to be able to install the software on your BarcoMed
Software CD. Click "Y "Y "Y "Y "Yes"
system restarts log in using an account with administrator
privileges. The BarcoMed Product Installation Wizard will restart
automatically.
If the BarcoMed Product Installation Wizard doesn't prompt you to
restart your system, it will continue to the Welcome Screen.
4. By default all the software on the BarcoMed Software CD will be
selected (figure 7). For the initial installation we recommend that
you install all of the software. If you do not want to install a
particular BarcoMed Software product, deselect it by clearing the
checkbox next to it. When you have finished selecting the
BarcoMed Software you wish to install, click "Inst
Wizard's Welcome Screen to continue or "Cancel"
wizard.
System manual Coronis 5MP
"OK" "OK" to continue. "OK"
"OK"
If you click "Inst "Install" "Inst "Inst "Inst
selected software. The wizard will install the software in the
order listed on the Wizard's Welcome Screen.
BarcoMed software driver installation
Figure 5
Figure 6
es" es" to restart your system. When your es"
es"
all" all" all" the wizard will begin installing the all"
"Install" "Inst "Inst all" all" on the all"
"Inst all"
"Cancel" to exit the "Cancel" "Cancel" "Cancel"
48