Festo CPX-FB38 Electronic Manual page 69

2. Commissioning
Festo P.BE−CPX−FB38−EN en 0804NH
5. Select Scan Boxes".
The System Manager searches to find field Devices
(Boxes").
The field Devices (here Box 1") are listed below
the related device entry (here Device 1"):
see subsequent figure in the margin.
6. Using the left mouse button, click on the box icon,
here Box 1 (CPX−FB38 64 Byte)", to display the related
properties, e.g. EtherCAT−specific settings or process
data.
The properties are displayed in the right area of the
System Manager window.
You will find EtherCAT−specific settings, e.g. EtherCAT
characteristics of the box or bus node in:
EtherCAT > Advanced Settings"
Typically, changes of the box properties
are not required.
7. If the box properties are not displayed:
Use the display function Split" to set the window
partition:
View" > Split"
2−33