Festo CPX-FB38 Electronic Manual page 59

2. Commissioning
Festo P.BE−CPX−FB38−EN en 0804NH
Slave properties
In the framework of importing the XML file, subsequent in
formation about the bus node or the EtherCAT slave is pro
vided to the configuration program.
Information
Vendor Name
Vendor ID
Product Code
Version Number
EtherCAT−Input/Output−Size 64 Byte/64 Byte
Product Name
Catalog Number
Tab. 2/13: EtherCAT slave properties
When the XML file has been imported, i.e. after incorporation
of the device properties into the configuration program, the
bus node is registered as potential EtherCAT device. Hence,
you can integrate the bus node into your EtherCAT network,
and configure the CPX terminal.
Description
Festo AG & Co. KG
0000001Dh
00000026h
00000002h
(independent of the operating mode)
CPX−FB38
(CPX−FB38 EtherCAT Bus module)
552 046
2−23