Festo CPX-FB38 Electronic Manual page 67

2. Commissioning
Festo P.BE−CPX−FB38−EN en 0804NH
Creating automation project
1. Start the TwinCAT System Manager:
Start > Programs > TwinCAT System > TwinCAT System
Manager (subsequently referred to as System Manager)
Note: The program path of your TwinCAT installation can
be different from the example shown here.
2. Create a new project in the System Manager:
File" > New"
3. Save the new project:
File" > Save as..."
4. Enter a project name and confirm the input with OK or
Save".
2−31