Aborted: The test could not proceed because of the server configuration.
Additional information concerning test failures is available in the extended
diagnostic results for each test.
The result is followed by an error code or other additional information about the
error.
Viewing the test log
You can use one of the following methods to access the test log when the tests are
completed:
v From the DSA command line, issue the DSA CLI view command or select
v From the DSA interactive menu, select getextendedresults .
v From the DSA interactive menu, select view to view all of the collected results
v In the DSA GUI, select DSA Error Log from the System Information page.
You can send the DSA error log file to IBM service and support to aid in diagnosing
the server problems or you can use the DSA CLI copy command to copy the log to
an external USB device.
Diagnostic messages
The following table describes the messages that the diagnostic programs might
generate and suggested actions to correct the detected problems. Follow the
suggested actions in the order in which they are listed in the action column.
130
IBM System x3250 M2 Types 4190, 4191 and 4194: Problem Determination and Service Guide
Diagnostic Event Log from the DSA graphical user interface (GUI).
and error log data.