Bosch Rexroth VFC 3210 Operating Instructions Manual page 199

VFC 3210
Fig. 12-57: Manual torque boost with square curve
In automatic boost mode, the output voltage boost percentage is determined au-
tomatically by the output frequency and the load current. The linear and square
V/f curves for automatic torque boost are shown as figures below.
Automatic torque boost with linear V/f curve
●
Fig. 12-58: Automatic torque boost with linear V/f curve
Automatic torque boot with square V/f curve
●
DOK-RCON04-VFC3210****-IT01-EN-P
Bosch Rexroth AG
Functions and Parameters
171/253