Table of Contents
Advertisement
VFC 3210
12.7.2 Frequency Arrival
This function is used to detect the difference between the output frequency and
the setting frequency. When the difference is within the frequency detection
width, an indication signal will be generated for further engineering in the appli-
cation.
Code
Name
E2.15 Relay 1 output selection
E2.70 Frequency detection width
The 'Speed arrival' signal is active on the selected output terminal when the dif-
ference between the 'Output frequency' and the 'Setting frequency' is within the
range set by parameter E2.70 'Frequency detection width':
Fig. 12-32: Frequency arrival
DOK-RCON04-VFC3210****-IT01-EN-P
Setting range
4: Speed arrival
0.00...400.00 Hz
Bosch Rexroth AG
Functions and Parameters
Default
Min.
1
–
2.50
0.01
Attri.
Stop
Run
129/253
Advertisement
Table of Contents
