Advertisement
Equipment Required for Post-Installation Adjustments
Equipment Type
Power meter
Power sensor, 2.4 mm
Adapter, 2.4 mm (f) to 2.4 mm (f)
RF cable, 2.4 mm (f) to 2.4 mm (f)
Step 1. Verify the Model, Serial, and Option Numbers of the Analyzer
Refer to the License Key Certificate supplied with the kit:
• Verify that the analyzer's model and serial numbers match those on the certificate.
• Verify that the option number on the certificate matches the option described by this
installation note.
If the model, serial, or option number do not match the expected results, you will not be able
to install the option. If this is the case, contact Agilent for assistance. Refer to
Assistance from Agilent" on page
8
Model or
Part Number
E4418B/E4419B
8487A
11900B
85133C
2.
Alternate Model or
Part Number
E4418A/E4419A
None
85056-60007
85133E
"Getting
Installation Note E8362-90004
Advertisement
