Advertisement
Step 11. Lower the Receiver Deck
1. Pull the latch pin (item
deck.
2. Lift the receiver deck to partially lower it, then release the latch pin (item
receiver deck to its fully lowered position and ensure that the latch pin latches in the
lowered position.
3. Using a T-10 TORX driver, reinstall the four screws, (item
Figure 15
Receiver Deck Lowering
22
y
) towards the opposite side of the analyzer to release the receiver
y
). Lower the
x
), to secure the receiver deck.
Installation Note E8362-90004
Advertisement
