Festo CPX-FB32 Electronic Manual page 112

B. Ethernet/IP Objects of the CPX−FB32
Attr. Access Name
no.
8 Get/Set Fault end filter
0: Register running faults (end of fault)
1: Do not register running faults (end of fault)
9 Get/Set Fault number filter
FN = fault number
0: Fault number filter inactive (presetting)
1: Register only defined FN
2: Do not register defined FN
3: Reserved
10 Get/Set Module/channel filter
With this diagnostic memory filter, the registering of
faults of other modules or channels can be suppres
sed in order that faults in a particular module or
channel can be analysed.
FN = fault number
0: Module/channel filter inactive (presetting)
1: Register only the FN of a module
2: Register only the FN of a channel
3: reserved
11 Get/Set Module number
Module number for the diagnostic memory filter
12 Get/Set Channel number
Channel number for the diagnostic memory filter
13 Get/Set Fault number
Fault number for the diagnostic memory filter
B−22
(filter inactive, presetting)
(filter active)
Type Function
no.
BYTE 3484
(bit 3)
BYTE 3484
(bits 4, 5)
BYTE 3484
(bits 6, 7)
BYTE 3485
(bit 0...7)
BYTE 3486
(bit 0...7)
BYTE 3487
(bit 0...7)
Festo P.BE−CPX−FB32−EN en 0605NH